Hydraulic Disc or Drum Trailer Brakes for 10 Inch Wheels
Updated 05/12/2015 | Published 05/09/2015
Products Featured in This Question
Question:
witch of these goes on a 10inch wheel guys?
asked by: Ned
Expert Reply:
We have several options for trailer brakes that will fit a 10 inch wheel. For a 10 inch wheel you will need a 8-1/2 inch hub and drum assembly such as # T1544500042 which has a 5 on 4-1/2 bolt pattern. Then for hydraulic drum brakes we have just one option, # T4442000 for the right side and # T4442100 for the left side. These are designed for 3,000 pound axles.
For disc brakes we have the following options:
For 2,000 pound axles we have # K2HR2D.
For 3,500 pound axles we have # K2HR35D-8.
Product Page this Question was Asked From
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Continue Researching
- Q&A: Correct Replacement Wall Switch for MaxxAir Vent Fan
- Q&A: Surge Drum Brake Actuator Recommendation that Has Electric Reverse Lock Out
- Article: Ram Trailer Tow Prep Package
- Q&A: Is It Normal for Trailer Wheels to Bow Out At the Bottom
- Q&A: 2023 Volkswagen Jetta Trailer Wiring Harness Recommendation for Small Utility Trailer
- Q&A: Replacement Actuator for Atwood 82543 for Trailer with Surge Brakes
- Q&A: Difference Between Demco 10 inch Drum Hydraulic Brakes and etrailer.com Brand Brakes
- Q&A: Replacement Wheel Cylinders for Demco Kar Kaddy KK360SS
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub