Are TorkLift Derringer Handles for Camper Tie-Down Turnbuckles # TLS9528 Available in Other Colors

Question

Question:

Do you have TLS9528 in white or silver.

asked by: Jon

0

Expert Reply:

TorkLift Derringer Handles for Camper Tie-Down Turnbuckles # TLS9528 are offered only in the standard black finish shown on the linked page. These fit 1/2-inch threaded rods found on most major camper turnbuckle assemblies.

expert reply by: Adam R

0

Answer 1

Hey Pat, yes you are correct. The TorkLift Derringer Handles #TLS9528 will work with virtually any threaded turnbuckle rod as long as it is 1/2" in diameter. The Spring load XL are a 1/2" diameter rod so those will be compatible.

view full answer...

Answer 2

The TorkLift FastGun Turnbuckles for Frame-Mounted Camper Tie-Downs - Polished Stainless Steel - Qty 2 #TLS9526 do not come as singles. You may be interested in TorkLift Derringer Handles for Camper Tie-Down Turnbuckles - Qty 4 #TLS9528 for use with…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Are TorkLift Derringer Handles for Camper Tie-Down Turnbuckles # TLS9528 Available in Other Colors

Product Page this Question was Asked From

Continue Researching