Can Double-Eye Leaf Spring Suspension be Replaced with Slipper Spring Suspension
Updated 04/24/2015 | Published 04/23/2015
Question:
I am trying to restore an old boat trailer. I am keeping the frame and updating the axle and springs. I do not have much info about the components, not sure what the axle or spring capacity is, however, when I pulled out my boat on it, the springs were completely flattened. I am looking at replacing the axle with a 3,500 lb one and get 1,750 lb springs. Can I replace my open eye springs with slipper springs if the measurements are identical? If so, do I need a different hanger kit than the one used by the open eye spring?
asked by: Farid
Expert Reply:
Slipper springs and double-eye springs use different mounting kits and hangers so you would actually have to do a bit more work and get all new parts if you wanted to switch from one to the other style. The hangers especially would be the biggest part of the switch because the old ones would have to be cut off and new ones welded on.
The u-bolt kit, spring seats, some hardware, is going to be different. I have included a couple of help articles that show all the things needed for double-eye and for slipper spring suspensions for you.
We do sell some axles as well. I have included a link to the 3500 pound options that we have. We carry the most common lengths. You will also see some axle-less options which are great because they have suspension built-in.
Product Page this Question was Asked From
etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1
- Hitch Covers
- Misc Covers
- Plain
- Rubber
- Fits 2 Inch Hitch
- Standard
- Square
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dump trailer door latch
- Shop: Vehicle Lights
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Safety Chain Mounts to Weld to a Trailer
- Video: Piranha LED Trailer Clearance and Side Marker Light Feature Review
- Q&A: Converting from Double-Eye Leaf Springs to Slipper Springs on my Triple Axle Trailer
- Shop: Cam-Action Lockable Door Latch for Small Trailers and Trucks - Zinc Plated Steel
- Shop: Brophy Safety Chain Mounting Bracket - 4" Long x 3/8" Diameter - Weld On - Qty 1
- Q&A: Recommended Handle Latch Kit for Barn Door on Dump Trailer
- Q&A: Slipper Springs vs. Double Eye Springs, Would Either Cause Severe Alignment Problems
- Shop: Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Zinc-Plated Steel
- Shop: Cam-Action Lockable Door Latch Kit w/ Wide Hasp for Small Enclosed Trailers - Zinc-Plated Steel
- Shop: Safety Chain U-Loop for Trailer Hitch - Weld-On - Qty 1
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Q&A: Does Trailer Door Have to Set Flush with Jamb for the Lock Side-Door Assembly # 3057-55 to Install
- Q&A: Cutout Dimensions Needed for Flush Mount Oval LED Trailer Lights
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Search Results: trailer wiring
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Brake Controller
on Hitch Covers
