Will the Roadmaster Tail Light Wiring Kit, # RM-155, Fit in 2010 Ford Escape Lens Housing

Updated 04/19/2010 | Published 04/16/2010

Question:

What are the dimensions of the lights and sockets of the RM Tail Light Wiring Kit. Or, better yet, do you already know if they fit in a 2010 Ford Escape lens housing?

asked by: Ed

Expert Reply:

The Roadmaster Tail Light Wiring Kit with Bulbs, # RM-155, is a universal wiring kit, so it can be used on your 2010 Ford Escape as long as you have room in your taillight housing to drill a 1 inch hole under the red lens. It uses the standard #1157 bulb which measures 1.83 inches tall and .97 inches width of the bulb. The sockets measures .95 inches where it goes into the lense.

The instructions show to drill a 1 inch hole in the taillight housing beneath a red lens to fit the socket and to make sure once the bulb is inserted in the socket it has 1/4 inch clearance from the top of the bulb to the lens.

Also when drilling the hole in your taillight housing it is better to use a hole saw, instead of a drill bit so there is less chance of any damage to the wires or housing.

expert reply by: Jeff D