Troubleshooting Turn Signals Blinking Rapidly With Trailer Connected to a 1983 Ford F-150
Updated 10/22/2024 | Published 04/04/2010 >
Question:
Hi, Im stumped on this one. I have a 4 way flat wired to my truck, 1983 F-150. The brake lights work. The running lights work. However, the turn signals with a trailer hooked up, it acts as if a bulb is burned out. It will blink, but extremely short and fast. With the trailer disconnected the turn signals work normally. I have one of those LED testers that hooks up with or with out a trailer and w/out the trailer hooked up the signals work normal. With trailer, fast and short again. It does blink on the correct side as well. It blinks fast/short regardless of the brake and running light condition on or off. Also, it does this with 3 different trailers. All 3 of those trailers work perfect with other vehicles 2007 Dodge RAM 2500, 1996 Legacy Outback, 2005 Toyota 4-Runner. Thanks for your time and any assistance you can provide.
asked by: Will M
Expert Reply:
The turn signal not working properly with a trailer connected to your 1983 Ford F-150 sounds like you will need to add heavy duty flashers from an auto parts store. These flashers have a higher capacity than the factory installed flashers.
If you have a Two-prong flasher on your truck, you can locate it by listening to the clicking sound, made by the signals when engaged, in the cab of the truck.
Continue Researching
- Shop: Trailer Wiring
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap - 2" x 20' - 400 lbs - Qty 1
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Shop: BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap - 2" x 16' - 400 lbs - Qty 1
- Search Results: correct track
- Q&A: How to Pick Out MoRryde Suspension Upgrade Kit for Shackle Straps
- Q&A: Best Equalizer Upgrade, Shocks, Suspension Kit For 8,000 lb Triple Axle Trailer w/ 35" Axle Spacing
- Search Results: trailer suspension parts
- Q&A: Need To Replace Wet Bolts And Bushings From MORryde Suspension Upgrade Kit
- Q&A: 2007 Weekend Warrior Toy Hauler Leaf Spring Shackle Replacement
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
Tim S.
10/21/2024
I have this same issue with my 1993 f150. In this situation, can failure to correct the issue cause damage to the truck or trailer wiring?