Need To Replace Wet Bolts And Bushings From MORryde Suspension Upgrade Kit

Question

Question:

I have a Morryde CRE3000 suspension 2 1/4 Shackle, I bought 5th wheel used dont think it got greased want to replace bolts and bushings, pulled bolt out of leaf spring and bushing was gone, do I need part MR86ZR?

asked by: Jim

0

Expert Reply:

Hello Jim; yes, the MORryde Suspension Upgrade Kit # MR86ZR is actually what you will need to replace your bolts and shackles. The # MR38ZR kit you mentioned does come with the same components, but this kit comes with longer bolts for the correct track system, so you would be paying extra for parts you wouldn't need. This # MR86ZR kit comes with the shackles too, even if yours are still in good shape I do recommend replacing them with new. I know you may not need the shackles, but it will be much more affordable to just buy the whole kit rather than buy individual components.

expert reply by: Jesse M

0

Answer 1

Measure the shackle strap lengths from hole center to hole center and you'll know which kit to get. If the distance is 2-1/4 inches long you'd want the part #MR86ZR or if they are instead 3-1/8 inches you'd want the part #MR26ZR. Those…

view full answer...

Answer 2

The turn signal not working properly with a trailer connected to your 1983 Ford F-150 sounds like you will need to add heavy duty flashers from an auto parts store. These flashers have a higher capacity than the factory installed flashers. If you…

view full answer...

Answer 3

Okay, we can get you all of that, and let's start with the equalizer upgrade, suspension kit, and shocks for your toy hauler with triple 8,000 lb axles. The best equalizer upgrade for your 35 inch axle spacing, along with the needed suspension…

view full answer...

Answer 4

Yes, the MORryde Suspension Upgrade Kit for Triple Axle Trailers w Correct Track - 2-1/4" Shackle Straps item #MR38ZR will work great on your 2007 Weekend Warrior Toy Hauler. The 1/4" difference on either side will not affect the function…

view full answer...

Answer 5

For upgraded shackles on your 2020 Heartland Cyclone 4007 5th wheel I recommend one of our suspension upgrade kits. In order to select the correct kit you will need to know the length of your current shackles. If you have 2-1/4" shackle straps…

view full answer...

Answer 6

Hi Tim; I can get you everything aside from the hangers. All of our standard hangers are designed to weld on but you may be able to find that bolt-on style elsewhere online or at a local shop. Hangers like those do still exist although I'm not…

view full answer...

Answer 7

Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…

view full answer...

Answer 8

Hey Kyle, this is a great question but the difference is the bolt length for the ones that connect to the hangers because the Correct Track brackets add thickness. You can see the difference in the two pictures I attached. Note how much more bolt is…

view full answer...

Answer 9

Hey Rusty! Can you measure the flat length? Check out the help article below which explains how to measure. This is the best solution for worn out leaf springs. Realistically they're probably a little shorter than 24-7/8" which means we…

view full answer...

Answer 10

There may be a bunch of different reason why your Lippert Level-Up system has suddenly stopped working. The most common reasons are due to a dead battery, extending your jacks too far, or a blown fuse. The first thing you should check for is the easy…

view full answer...

Answer 11

In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part #MR86ZR or if you have 3-1/8" long shackle straps you can use…

view full answer...

Answer 12

Hey Luis, We can answer both your questions in one as yes, you can change from the CRE3000 to AllTrek 4000, and it's definitely an upgrade worth making, as the AllTrek 4000 is better in a couple ways from the CRE3000. The first is the 4000 is…

view full answer...

Need To Replace Wet Bolts And Bushings From MORryde Suspension Upgrade Kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching