Replacement Hitch Ball for an Andersen Ultimate Fifth Wheel Adapter

Question

Question:

can i get hold of a relacement greaseless as mine fell out and was damaged. i beleive model number is am3200. this unit bolts on to the 5th wheel asm

asked by: Paul M

0

Expert Reply:

The part number you need for a replacement hitch ball for your Andersen Ultimate Connection part # AM3200 is the part # AM3201. There are no greaseless balls that are designed as replacement balls for this product, but the # AM3201 is made of aluminum so it won't corrode.

expert reply by: Jameson C

0

Bob

5/10/2020

What do you recommend to enable me to use my stabilization Tru pod. I have the Anderson hitch is there a steel bal available that I could bolt to a plate then weld to the tripod? Thanks

Chris R.

5/12/2020

I'm not sure what brand tripod you have, but you could potentially use the Ultra-Fab # UF19-001057. It's typically used to replace the coupler of part # UF19-950500 when used with the Andersen Hitch, but it may work for other brands as well.

Answer 1

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter #AM3200 will not accept other gooseneck balls like the #C60692 so you wouldn't be able swap it out the connection point with anything but the Replacement Ball #AM3201.…

view full answer...

Answer 2

I can definitely confirm the B&W Ball and Safety Chain Kit #BWGNXA2061 will fit a 2017 Ford F-350 with the OEM Prep Package. That being said, there have been issues with the B&W #BWGNXA2061 installing with the Andersen Gooseneck Adapter…

view full answer...

Answer 3

Hey Jeff, so we only carry the replacement ball for the Andersen Ultimate that has two holes with the part #AM3201. I don't believe we ever carried a version that had three holes but this would work for you to replace what you have.

view full answer...

Answer 4

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3201 that you referenced is the correct replacement for a 2-5/16 inch ball for the Andersen Ultimate connection it sounds like you have.

view full answer...

Answer 5

It is perfectly acceptable to use the B&W Turnover ball Gooseneck hitch #BW77FR, and the #BWGNXA4085 offset ball be used with an Andersen Ultimate 5th wheel Connection. The Andersen hitch adapter provides about 8 inches of offset, plus the 4…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Replacement Hitch Ball for an Andersen Ultimate Fifth Wheel Adapter

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching