Replacement Quick Grip Hardware for an Unknown Thule Roof Box

Question

Question:

There is no identification on the box but I need to replace two clamps and cradles. The box is about 7 ft long. I have in my basket the TH05738 and TH05740

asked by: Jenn

0

Expert Reply:

Thank you for the pictures you submitted. Based on them I was I was able to determine that your box uses the Quick Grip Mount Assembly # TH05738 and the # TH8523387001 for cradles.

expert reply by: Jameson C

0

click to enlarge

Answer 1

To replace the mounting hardware that came with your Thule Atlantis 2100 roof cargo box you need the following parts: - Quick Grip Mount Assembly #TH05738 - Slide Strip #TH05401 - Snapfit Cradle Replacement Kit #TH68NB The Quick Grip and Slide Strip…

view full answer...

Answer 2

The part you are looking for is the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware Item #TH8523387001. These are sold in quantities of 1. If you also need the screw to attach the cradle to the AcuTight mount it is #TH05728.

view full answer...

Answer 3

The Quick Grip Cradles #TH8523387001 referenced in your question will go underneath the crossbars on your vehicle. When the knob is turned on the Quick Grip Mounts #TH05738, the clamps will close around the cradle and press it against the crossbar.…

view full answer...

Answer 4

Would you be able to send me some photos of your roof box and the area where the mounting hardware is installed? If you have a newer Thule/MB cargo box then the Replacement Quick Grip Mount Assembly #TH05738 should work but if I could see some photos…

view full answer...

Answer 5

The Replacement Thule AcuTight Cradle #TH8523387001 is a single cradle while the Thule Snapfit Cradle Replacement Kit #TH68NB contains 4 cradles and 4 screws.

view full answer...

Answer 6

It doesn't look like any Thule box that I have ever seen but we rarely get a look at the ones they make for dealerships. If there is a part number on it anywhere you may be able to call a Mercedes dealer and have them look it up. I can determine…

view full answer...

Answer 7

The flat side of the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware part #TH8523387001 will go against the bottom of the cargo box which you can see in the attached photo. Therefore, the screw hole will be facing down towards…

view full answer...

Answer 8

Yes, the Thule Replacement Cradles #TH8523387001 with Screws #TH05728 that you referenced are correct replacements for your Thule Atlantis series cargo box.

view full answer...

Answer 9

It is possible that the Replacement Quick Grip Mount Assembly #TH05738 will work on your BMW box, though they have never been tested together and we don't have any type of access to those cargo boxes so it is impossible to make a definitive…

view full answer...

Answer 10

I spoke with my contact at Thule and she stated that the Quick Grip Mounts consist of 3 parts. First, there is the assembly itself, #TH05738. There is also a cradle, #TH8523387001, and a slide strip, #TH05401. If additional hardware is needed, there…

view full answer...

Answer 11

Yes, the Acutight Replacement Cradle #TH8523387001 that you referenced would be the correct replacement cradle for your Thule Spirit Cargo Box 1600XT because this box uses the AcuTight installation hardware. This cradle also fits the last generation…

view full answer...

Answer 12

Arthur, it looks like that is a rebranded Thule Force cargo box, so the Replacement Quick Grip Mount Assembly #TH05738 should work fine.

view full answer...

Replacement Quick Grip Hardware for an Unknown Thule Roof Box

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching