Trailer Hitch, Hitch Ball, and Wiring Recommendations for a 2010 Scion xB
Updated 03/26/2010 | Published 03/25/2010
Products Featured in This Question
Question:
Does hitch with number 12490 fit the scion xb 2010?
asked by: Mike L
Expert Reply:
Yes. The Curt Class II Trailer Hitch Receiver with Drawbar, # 12490, will fit your 2010 Scion xB. This hitch comes with a drawbar, hitch pin and clip. There is no drilling required with this simple bolt on installation. I have included links to the instructions and an installation video below.
This Class II hitch has a gross trailer weight of 3,500 pounds and a tongue weight capacity of 350 pounds. You will need to consult your vehicles owners manual for the xBs specific towing ratings. This hitch cannot be used with weight distribution.
You may also be interested in a hitch ball like # 19258 (1-9/16 inch) or # A-82 (2 inch). Check your trailer coupler to determine the size ball you need. These hitch balls will fit in the drawbar that comes with the hitch. I also recommend Tow Ready Custom Fit Vehicle Wiring, # 118468, if you ever plan on towing anything that requires a connection to the vehicle. This wiring has a fairly simple installation process. It plugs in line with your vehicles taillights and provides a 4-pole connection at the rear of the vehicle. I have included a link to the instructions below.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- For Towing
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: 2012 Scion xB Curt Trailer Hitch Receiver: Complete Installation
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Trailer Wiring Harness Installation - 2014 Scion xB
- Q&A: Hitch Receiver and Bike Rack Options to Carry a Pedego Interceptor E-Bike on a 2008 Scion xB
- Search Results: trailer harness
- Video: Curt Class II Drawbar Review
- Video: Feature Breakdown: Curt Class II Drawbar
- Video: The Low-Down on the Curt Class II Drawbar
- Search Results: motorcycle ramps
- Search Results: trailer wiring
- Search Results: trailer wiring harness
- Search Results: dirt bike carrier
- Shop: Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Shop: Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
- Shop: 1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Shop: Vehicle Tow Bar Wiring
- Video: All You Need to Know About the Draw-Tite Drawbar for 1-1/4" Hitch
- Video: Review of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118460
- Q&A: How Easy To Install T-One Vehicle Wiring Harness On Scion xB Is It Just Plug And Go
- Q&A: Recommended Trailer Wiring Harness for 2012 Scion XB
- Q&A: Everything Needed for a 2006 Scion XB to Tow a Small Trailer Carrying a Motorcycle
- Q&A: What is Proper Trailer Wiring for a 2009 Scion xB
- Search Results: t~one vehicle wiring harness with 4~pole flat trailer connector
- Search Results: dielectric grease
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
on Trailer Hitch
