Where to Measure to Pick Out Replacement Hubs for a Trailer
Updated 01/19/2015 | Published 01/18/2015
Question:
I have a very old trailer and i need a hub, i have a micrometer and i was wanting to know if i sent you the specs of the spindle you could possibly tell which hub will fit. thank you please messege me back
asked by: Dallas S
0
Expert Reply:
We can definitely help! Using your micrometer get the dimensions of where the bearings and the grease seal ride and we can set you up with a hub that fits (if available).
Check out the picture I attached for more information on where to measure.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: Compatibility Of 3500 lb EZ Lube Spindles And Dexter Hub Assemblies
- Shop: CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: All You Need to Know About the Trailer Hub and Drum Assembly
- Video: An In-Depth Look at the Trailer Idler Hub Assembly for 3,500-lb Axles
- Q&A: Do Dexter 3,500 lb Axles Use Hubs With L68149 and L44649 Bearings
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: Do Bearing Buddies Work Well on Travel Trailer Hubs
- Q&A: Bearing Protector Not Wanting to Fit Into Hub Bore
- Q&A: How do you Install a Grease Seal After Replacing Bearings or Re-Packing Grease
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: Bearing Kit and Hub Recommendation for a Dexter P-12 SLR Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Trailer Wiring Diagrams