Do Dexter 3,500 lb Axles Use Hubs With L68149 and L44649 Bearings
Updated 08/29/2019 | Published 08/28/2019
Products Featured in This Question
Question:
Not sure on bearing size on my trailer..do all the 3.5k Dexter axles have same inner and outer bearings ? The axle is on a B Wise 5x8 trailer ..may have to call B Wise for info..I have no way to get proper measurements...thanks again for your time !! P.S... THIS SITE IS THE MOST USEFUL SITE I HAVE USED..PRICES ARE FAIR AND THE INFO YOU PRVIDE IS PRICELESS..MY WORK DAY STARTS AT 3AM SOME DAYs END AT 5 OR 6 PM or later. ..NOT A LOT OF TIME FOR RESEARCH...
asked by: Chris
Helpful Expert Reply:
Thanks for the kind words, it's nice to hear! Also, it is extremely likely that your Dexter 3,500 lb axle is going to have inner bearing # L68149 and outer bearing # L44649 which will allow you to use the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # 84655UC1-EZ you referenced.
For reference, every single one of the Dexter hubs we carry for 3,500 lb axles use those same bearings so this hub will work for you without issue.
I've added a link to a video review of this hub for you to check out as well.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: Compatibility Of 3500 lb EZ Lube Spindles And Dexter Hub Assemblies
- Shop: CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Video: An In-Depth Look at the Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: All You Need to Know About the Trailer Hub and Drum Assembly
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Q&A: Where to Measure to Pick Out Replacement Hubs for a Trailer
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Search Results: bearing buddy trailer bearings races seals caps
- Search Results: lippert trailer bearings races seals caps
- Q&A: Do Bearing Buddies Work Well on Travel Trailer Hubs
- Q&A: Bearing Protector Not Wanting to Fit Into Hub Bore
- Q&A: How do you Install a Grease Seal After Replacing Bearings or Re-Packing Grease
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: Grease Used & Bearing Buddies For 2k Dexter Idler Hub 34822545BX
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Search Results: trailer jack
on Trailer Hubs and Drums
