bing tracking image
  1. RV Transfer Switch
  2. Progressive Dynamics
  3. 50 Amp
  4. 120V
  5. 240V
50A Transfer Switch - Metal Box - 120V/240V AC
Progressive Dynamics

50A Transfer Switch - Metal Box - 120V/240V AC

Part Number: PD52
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$187.86
RV Transfer Switch
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This transfer switch automatically changes from shore power to generator power when needed. Protects your electrical system from AC power backfeed. Great Prices for the best rv transfer switch from Progressive Dynamics. 50A Transfer Switch - Metal Box - 120V/240V AC part number PD52 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (90)
  • Q & A (0)
  • Photos

Progressive Dynamics RV Transfer Switch - PD52

  • 50 Amp
  • Progressive Dynamics
  • 120V
  • 240V

This transfer switch automatically changes from shore power to generator power when needed. Protects your electrical system from AC power backfeed.


Features:

  • Transfer switch automatically reroutes your RV's AC input from shore power to generator power when activated
    • Can also be used with an inverter in place of a generator
  • Time delay function only allows one input to feed your RV's breaker panel at a time
    • Protects system from AC power backfeed
  • 50-Amp double pole switch includes 2 separate 120V legs
  • Durable metal case with cord knockouts
  • Made in the USA


Specs:

  • Amperage:
    • Line rating: 50 amps
    • Neutral rating: 70 amps
  • Voltage: 120V/240V
  • Dimensions: 10-3/8" long x 6-7/8" wide x 4-1/2" tall
  • Weight: 7 lbs
  • 2-Year warranty


transfer switch

This transfer switch has been pre-wired to automatically change the primary source of AC current from shore power to generator or inverter power when activated. It has a 50-amp double pole switch that includes (2) 120V legs, which can provide 240V service if needed. To prevent electrical interruptions, the time delay circuit board allows the alternate power source to stabilize before a transfer occurs. Additionally, since the switch only accepts one active source, it protects your electrical system from dangerous backfeed that can damage your equipment.


transfer switch open

The metal case has cord knockouts for the various connections.


Automatic Transfer Switch Installation

The switch wires to your shore power input and generator or inverter input. Both inputs are wired to the AC panel.




PD52V Progressive Dynamics Transfer Switch - Metal Enclosure - 50 Amp - 120V/240V AC

Replaces PD52

Installation Details PD52 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

50A Transfer Switch - Metal Box - 120V/240V AC - PD52

Average Customer Rating:  4.8 out of 5 stars   (90 Customer Reviews)

This transfer switch automatically changes from shore power to generator power when needed. Protects your electrical system from AC power backfeed.

by:

As always, happy with the service from etrailer. I particularly appreciate their videos highlighting products under consideration. I am also a fan of the speed of delivery and the shipment tracking that they provide. This Progressive Dynamics PD52 was purchased to replace a 15-year-old OEM transfer switch in our motorhome that was beginning to give us trouble. The process was practically plug-and play. The configuration of the electrical contactors within the box is the same as that of the old one, so wiring was all located in the correct positions from the get go. I selected this particular ATS because it has a metal case. Plastic would have probably worked just fine, but I prefer metal in case anything should start heating up within it. Good product and good service. No complaints!



by:

All the information I needed was easy to find and their live chat helped confirm the part I chose. very helpful, much appreciated.

Ben profile picture

Ben

8/30/2024

we installed in a customer vehicle and it has worked well. the buying process was impressive enough for me to leave a review, which i dont normally do. thank you!



by:

Service is second to none. However, the switch is got was missing a coil that is mounted to The bottom. Also the circuit board is missing a green led light. I thought this was a direct replacement for my PD52(P).

Jenny N. profile picture
Etrailer Expert

Jenny N.

5/21/2024

I reached out to the manufacturer about this and it sounds like you might have had model number PD52C which is the 50 amp Transfer Switch with the generator start option, which is one that we do not currently carry. The new SMD LED light is only visible when it lights up. You can still use this model with your camper. It just will not have the generator start coil like the original one did.



by:

Jamie... You're the bomb!
The xfer switch
I purchased works flawlessly. Absolutely works like it should. Etrailer has what we need as advertised.... Great site to purchase parts.

I'm a Happy Camper now!



by:

I gave this 3 stars because the original switch (same make/model/identical to this one) failed shortly after the warranty expired. Very annoying. I use my trailer heavily 6 months/year (snowbirds), so maybe the manufacturer intended this unit for occasional weekend summertime use. IDK. I bought the same make/model because it was easier than researching a different replacement and I needed a replacement NOW. etrailer had it in-stock at a similar price to other retailers, and they shipped it quickly. I've always had good experiences buying from etrailer.

I can't say that this a bad unit, but it leaves a bad taste in my mouth that it failed right after the warranty expired.

FWIW, my original unit failed because the shore power relay froze in the "off" or "almost off" position. When I plugged into shore power, the relay would not move. I tried applying power to the generator input, and the relay made a really bad, scary, grinding noise.

The replacement works fine.



by:

Ordered a transfer switch for my Newmar diesel pusher. The model Newmar recommended was in stock. It showed up on time as promised. Install was relatively easy.
Highly recommend etrailer!

Ted profile picture

Ted

1/22/2024

Transfer switch has perfectly...



by:

It was a crazy situation and I called and I can’t tell you how happy I was with your service, you guys totally took care of me right away, and I’m greatly appreciate your kind response and great customer service, no issues so far and will definitely pass on this website to my friends…you guys are awesome and thank you !!



by:

This transfer switch was recommended by our RV specialist. It was a perfect replacement for our 2006 Monaco Diplomat. Although, he was amazing in how he mounted it. (Also note that I appreciate the 1 year product review. Most companies ask for a review even before you receive the product. That makes no sense. 1 year is good.)



by:

The switch was a replacement for one that was fried due to fluctuating ground (shore) power during a major mid-west storm last week that put thousands without power. I called etrailer (our internet was out as well) and found that they had one in stock. I ordered it and it was on my doorstep 5 days later...which isn't bad for something that had to be shipped via ground from Salt Lake city. It's an exact replacement and it arrived in good condition due to the excellent packing.

I've ordered before from etrailer.com and they usually have what I want in stock. I live about 100 miles from the STL area and the shipping is usually 2 days even though they advertise that it might be 4-5. The company has good technical support and for certain items, good installation videos.



by:

This transfer switch replaced my failed TS that had the built in surge protection that was a widespread issue. It has been working great for over a year now.



by:

Worked like a charm!! Just what I needed and expected.



by:

great job. got it the next day



by:

Worked perfectly…Great help with ordering the product



by:

Order was on time,install was simple.

Lon profile picture

Lon

11/3/2023

It is working fine, the hard part was the install.



by:

Great service and response



by:

why are the nipples stamped the wrong way,, shows that no one is doing quality check , very poor.



by:

Great service & awesome to do business with!



by:

etrailer had the part I needed but was incapable of shipping it overnight. The order was placed correctly as confirmed by the agent I contacted to find out where my order was. The order was shipped on Friday and not delivered until Monday. Because of this level of service I had to sit for 5 days without power.



by:

Although where I had to install this device was difficult, it works great!!



by:

Perfect fit for what we needed!



by:

PD52 was ordered on 7/12/20 via internet. No contact with me till I called on Thursday, 7/16 and order was found. Paid for 4-6 day delivery. Shipping e-mail received on 7/17/20 via UPS. Package delivered on 7/21/20. Item was inside larger cardboard box with no package material, bouncing around and box was damaged. Hoping electronic components are OK. To be installed on 7/24/20 by electrician. Very first problem with e-trailer after many orders.



by:

The transfer relay was as represented and works great. I didn’t have generator power or shore power. In fact 240v was in my outlets in half of the motor home. My original transfer relay had one relay for each leg. This one has only two, and works great. It took a little to be sure I was wiring it correctly. I also replaced the box to plug in my shore cord. A previous owner had pulled away with the cable still attached. I used a “drill to fit” plastic box from a big box store. I have both generator and shore power.



by:

Good looking box, great shipping



by:

Awesome help



by:

We’ve ordered from etrailer before and the speed of their shipping is unbeatable so we knew who to order from when our generator transfer switch failed from a power surge. They came through for us once again when we were in a bind! I paid for 2 day shipping and it was packaged and shipped immediately and delivered exactly when they estimated. It was packaged well and functions exactly the way it should. Very pleased!! Thank you


25
90
Show More Reviews

See what our Experts say about this Progressive Dynamics RV Transfer Switch

  • Recommended Transfer Switch For A 1999 Winnebago Adventurer 33B Class A Motorhome
    Since you have a 1999 Winnebago Adventurer 33B Class A Motorhome you would most likely have 50 amp service and would need a 50 amp transfer switch like the Progressive Dynamics 50A Transfer Switch # PD52. I have attached a short video below where Dave will walk you through the installation process and show you this switch in use.
    view full answer...
  • Replacement Converter Options For A 1994 Fleetwood RV
    Your converter must have a built-in transfer switch to be able to switch between shore power and generator power. The Progressive Dynamics converters and power centers that we offer do not include a transfer switch so one would need to be purchased separately. As for replacing the converter, you'll typically want to just match the amperage of what you currently have to avoid having to run new wire. 30 to 45 amps is pretty typically for most RV's, but it's best to check the label on your...
    view full answer...
  • Recommended 50 Amp Transfer Switch To Accommodate Shore Power, Generator Power, And Inverter Power
    A transfer switch is only going to have two receptacles to accept power from so you wouldn't be able to connect all of your systems together, but I do have a solution for you. You would need to use a 50 amp transfer switch like the Progressive Dynamics Transfer Switch # PD52 and connect it to your shore power and generator power to the trailer, giving you an automatic switch over between the two sources, as you can see in the attached video below. With that installed you can then wire...
    view full answer...
  • Can Progressive Dynamics Transfer Switch PD52 Have Shore Power on Normally Closed Connection
    I reached out to Progressive Dynamics to find out if you could have the shore power on the Normally Closed position for the Progressive Dynamics Transfer Switch # PD52, and this is what I was told via our tech contact: "I think there is confusion here; the PD52 uses two normally open contactors not a single relay with normally closed contacts in the inactive position as with the PD51. Second, the RV transfer switches are designed as "Generator Priority" that means that whenever AC voltage...
    view full answer...
  • Can Progressive Dynamics Transfer Switch PD52 Be Installed In The Vertical Position?
    I attached a section of the instructions which shows you should mount the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V # PD52 in the vertical position. It should not be installed in the horizontal position. If you need longer wire then I recommend looking on the attached link so you can match up some wire that is the same gauge you are currently using. You will likely use 10 gauge like 10 Gauge Primary Wire - Blue - per Foot # 10-1-1. You may need some connectors...
    view full answer...
    Image 1 for
  • Replacement Transfer Switch For Progressive Dynamics PD52
    I have a solution for you. As you know the unit you are looking for is no longer available and we do not have replacement parts either. However, I do have the replacement for that unit which is the following part: **Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V # PD52. This PD52V will be the exact replacement for your old PD52 style unit.
    view full answer...
  • Recommended Transfer Switch For 50 Amp Shore Power
    Since you'll be pulling 50 amp service you'll want the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V Item # PD52. This transfer switch will automatically switch over from shore power to generator power and back as needed. There will be a 25-40 second delay to ensure the power coming from the generator is properly transitioned to prevent damage to any components. You'll be able to plug your 30 amp generator into this transfer switch but will not be able to run both...
    view full answer...
  • Progressive Dynamics Transfer Switch and Inverter
    Yes, Progressive Dynamics Transfer Switch, # PD52 automatically changes from shore power to generator power when needed and can also be used with an inverter type generator or an invertor. To isolate the charger you would need to place a switch in the circuit.
    view full answer...
  • What Setup do I Need to Run Generator Power/Battery Power with the # PD4575K18LS8?
    Even though the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger # PD4575K18LS8 is designed to use with 50-amp shore power, I confirmed with my tech at Progressive Dynamics that you can use the panel with a generator with the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp # PD52. If you are looking to run AC appliances to run on battery power, this will require a setup that requires an inverter and a different configuration.
    view full answer...
  • Is Any Manual Switching Needed with Mighty-Mini Distribution Panel?
    I assume that by “Van Power” you mean 12 volt charging via the 12 volt accessory and charging line coming from the van to the battery. As a matter of physics, the battery will see the 12-volt source with the highest voltage. So, if your van 12-volt line is supplying 13 volts and your solar panels are supplying 12.8 volts, then you will have charging at 13 volts without any intervention from the panel. When connected to shore or generator power the converter will charge the battery. When...
    view full answer...
  • Transfer Switch For A 50 Amp RV To A 30 Amp Shore Service
    Realistically you should be using a 50A transfer switch like the: -Progressive Dynamics Transfer Switch # PD52. As using a 30A transfer switch would leave one leg of your panel unhooked, which isn't ideal. However, with that being said you can use your 30A transfer switch with a 50A service.
    view full answer...
  • Comparing Progressive Dynamics PD52 to PD52DCS
    The Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V # PD52 (Alternatively PD52V) and the PD52DCS/PD52DCSV are both part of the PD52 series but there are some differences. Both share the same voltage rating and current ratings. The # PD52 is slightly smaller in size and weight, and has a different control board. It also does not include a remote, which the PD52DCS has. The other differences are additional features the PD52DCS has that the # PD52 does not. It has open...
    view full answer...
    Image 1 for
  • Replacement Converter for Magnetek 6332 with Inverter and Transfer Switch
    The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers # PD4635V that you referenced was designed specifically for replacing the 6332 model Magnetek converter you have so this would work great. You'd remove the converter you have now and install this in it's place. You would need to use a transfer switch like the part # PD52 as well to go between shore power and generator power. The panel was designed for adding a transfer switch and has a section in the attached instructions...
    view full answer...
  • Transfer Switch for 2021 Keystone Montana 3781RL that Can Use 50 and 30 Amp Power
    Yes, since the Progressive Dynamics Transfer Switch # PD52 is 120 and 240 volt compatible this will work fine with 30 amp as well as 50 amp. This 50 Amp transfer switch will allow you to hook up the 30 Amp shore power to the HOT 1 connection in the box. When you decide to upgrade to a 50 amp setup, you will use HOT 1 and HOT 2.
    view full answer...
  • Replacement Transfer Switch for Parallax ATS501
    Your Parrallax ats501 transfer switch is a 50 amp transfer switch like what the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp # PD52 that you referenced was designed to replace. This would be a solid choice that would work great and be very reliable long term. I attached a review video for this for you to check out as well.
    view full answer...
  • PD52 RV Transfer Switch Wiring
    Regarding the Progressive Dynamics # PD52 Transfer Switch, you should follow the directions provided in the installation guide, provided in the link below, and available on the product description page. If you are not familiar with electrical circuits I would advise that you call upon a electrician or qualified RV Technician to assist you with any changes or additions. The product pictures include the general wiring diagram and where the wires from shore power connect and where the generator...
    view full answer...
  • Can I Use 50 Amp Transfer Switch With 30 Amp RV Setup
    It is possible to use a 50 Amp transfer switch with a 30 amp setup since you plan on upgrading in the future however, the Furrion Transfer 50 Amp Switch is made for 50 Amp setups. I recommend to use Progressive Dynamics 50 Amp Transfer Switch part # PD52. This 50 Amp transfer switch will allow you to hook up the 30 Amp shore power to the HOT 1 connection in the box. When you decide to upgrade to a 50 amp setup, you will use HOT 1 and HOT 2.
    view full answer...
  • Recommended Made in USA 50 Amp Automatic Transfer Switch for RV
    Yes, the Progressive Dynamics Transfer Switch part # PD52 has an automatic design with 50 amp rating and it's made right here in the USA. We also offer the Go Power Automatic Transfer Switch part # 34270278 which is an automatic switch with 50 amp rating made here in the USA. They are both great options, the Go Power is slightly smaller but I would go with whichever is more cost effective at the time.
    view full answer...
  • Can I Use the Progressive Dynamics PD52 to Replace a Furrion F50ATS
    Yes. You could use the Progressive Dynamics # PD52 to replace your Furrion # F50ATS; they're both rated for 50amps so they are compatible. The Furrion does provide a bit of extra protection against power surges though with it's 125/250v supply, so I do prefer that choice when possible.
    view full answer...
  • Availability Of Control Board For PD52 Auto Transfer Switch
    Hello Tim, thanks for reaching out. We do offer the Progressive Dynamics # PD52 transfer switch, but unfortunately the control board for this unit is not available separately. The only solution we can offer is to replace the entire transfer switch with a new one.
    view full answer...
  • 50A Transfer Switch Needed for My RV
    Hey Virgil, thanks for reaching out! Sounds like the Progressive Dynamics 50A Transfer Switch # PD52 is what you're looking for!
    view full answer...
  • Does Using PD52 Require Additional Transfer Switch When Adding Inverter
    The PD1600 series contains an internal transfer switch. We do not recommend feeding the output of the inverter back to the MAIN AC distribution panel due to the fact that a fully operational panel would quickly drain the battery and the converter/charger must be isolated from the inverter when the inverter is operating. We recommend feeding the inverter AC IN from the main panel and feeding the AC OUT to a sub panel for multiple branch circuits or directly to a single branch circuit.
    view full answer...
  • Is There a Replacement For The Progressive Dynamics PD52DCSD Transfer Switch With Surge Protection?
    Don't worry Gilles, even though your Progressive Dynamics PD52DCSD is obsolete you can replace it with the Transfer Switch # PD52. If you wish to still have the surge protection you can add the Power Watchdog # HU27FR in line of the transfer switch since the new transfer switch does not have it built in like your old one. The new surge protection will Bluetooth to your phone rather than use the panel like you currently have.
    view full answer...
  • Is There A 50 amp Transfer Switch That Can Be Mounted Horizontally?
    Hello Andrew. You are correct that the # PD52 cannot be mounted horizontally. An alternative would be to use the Furrion Automatic Transfer Switch # F50ATS. This is a very similar 50 amp transfer switch and it does not have any such mounting position restrictions. Furrion just recommend that you find a secure, indoor mounting location that will be sheltered from the elements. You will find the instructions for this transfer switch linked below.
    view full answer...


< Previous
12



Do you have a question about this RV Transfer Switch?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Carrie F
Updated by:
Carrie F
Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924