See what our Experts say about this CargoBuckle ATV-UTV Tie Downs

• Trailer Hitch, Wiring and Ball Mount for 2017 Ford Mustang
  There is a potential way for you to haul an electric wheelchair with a 2017 Ford Mustang, although there is not an adapter that is going to work. The reason for that is there is just one 1-1/4 inch to 2 inch adapter with rise that works with a Class I hitch, and that adapter, the Brophy # HT5R, has a 5 inch rise, which doesn't meet your needs. Additionally, the use of any adapter will reduce the weight capacity of your hitch by 50 percent, and since there are only Class I hitches with a...
  view full answer...
  
• Do You Have a Utility Trailer that is Smaller than the K2 Mighty Multi Trailer # K2MMT4X6
  I have a solution for you. Unfortunately, we do not currently carry a utility trailer that is smaller than the Detail K2 Mighty Multi Utility Trailer # K2MMT4X6 with the dimensions of 72inch long x 48inch wide x 7 1/2 tall. However, if you are looking for the next smallest option, it would be the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR. The Flint Hill Goods carrier has inside dimensions of 48" long x 28" wide x 5" deep tall. In addition, the Flint...
  view full answer...
• What Is Needed To Hang The Thetford Titan Tote Portable Waste Tank TH94XE From A Ladder?
  Hi Denise! The Thetford Titan Tote Portable Waste Tank - 4 Wheel - 27 Gallon # TH94XE can hang on just about anything that can carry it, to be honest. It weighs 38 pounds when empty and 27 gallons of water weighs 224 pounds, so as long as where you want to hang this can handle around 262 pounds, you are good to go! Granted, this typically will not be filled to capacity. At least not all the time. The hook used for this to hang on a ladder is also included, so no other parts will be needed....
  view full answer...
• Will the Thule Xporter Pro Shift Rack System Work with My Folding Tonneau Cover on My 2021 Tundra?
  I have a solution for you. In order for the Xporter Pro Shift # TH54RR to work on your 2021 Toyota Tundra is if you pair the Pro Shift with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH24RV. This is how you will be able to mount the Xporter with the tonneau cover you have pictured. Since the TracRac SR base rails install into your truck's stake pockets, you will be able to use the Xporter Pro Shift without interfering with the bed rails. Also, it is important to...
  view full answer...
  
• Recommended Frame Mounted Trailer Hitch And Cargo Carrier For Lance 2375 Travel Trailer
  Using a bike carrier to carry a generator would certainly void the warranty of the carrier and may create an unsafe situation. I recommend installing a frame mounted trailer hitch like part # 13703 on your Lance 2375. This hitch will work with C-channel, I-beam, or box frames from 22 to 72 inches wide. The trailer hitch has a tongue weight capacity of 350-lbs. Per Curt, any non-trailer loads applied to this product must be supported by auxiliary stabilizing straps like part # 18050. For...
  view full answer...
• Trailer Hitch and Cargo Carrier Recommendation for a 2013 Nissan Juke
  We do have trailer hitches and hitch mount cargo carriers that are compatible with your 2013 Nissan Juke. If you have the AWD model I recommend the Draw-Tite # 24867 but if you have the FWD model than I recommend the Draw-Tite # 24892. I like the Draw-Tite over the Curt for your application because Curt requires the stabilizer strap # 18050 be used with a cargo carrier. Although it doesn't hurt anything (and can be beneficial) it isn't required by Draw-Tite. Then for a cargo carrier I...
  view full answer...
  
• Hitch and Cargo Carrier for 5th Wheel Hitch to Carry Generator
  In order to carry your generator on the back of your 5th wheel, you will need a hitch so you can attach a cargo carrier. Assuming the ramp on your Palomino will allow the hitch, you can easily add one, the Adjustable Width Trailer Hitch Receiver for RVs # 13703. You simply need to measure the frame to make sure it is between 22 and 77 inches wide outside-to-outside in order to install this hitch, which can then be bolted or welded on. The hitch has a 350 lb tongue weight capacity, which...
  view full answer...
• Curt Class III and Class IV Hitch Comparison for 2018 Ford Transit T350 Passenger Van
  You are correct that we offer both Class III and Class IV 2-inch hitches for your 2018 Ford Transit T350 passenger van. If trailer towing were your intended application then the Class IV hitch # C14012 would definitely be my top recommendation since it can tow 2000-lbs more weight than the Class III model # C13193. But since your intended use is with a hitch-mount cargo carrier like # C18151 I recommend instead that you go with their Class III hitch # C13193 since it has a higher tongue...
  view full answer...
  
• What Determines Cargo Weight Limit for Hitch Carrier Installed on RV Bumper Hitch
  The amount of actual cargo weight you can safely transport on a hitch cargo carrier installed in a bumper-mounted hitch is determined by the lowest-rated component. Those components consist of the RV's bumper, the hitch such as # UF35-946401 that is mounted on it, and the cargo carrier itself. The lowest-rated of the three items will determine overall capacity. If you have a 500-lb-rated cargo carrier like Curt # C18151 and install this in the 200-lb-rated Ultra-Fab RV Hitch # UF35-946401...
  view full answer...
• Hitch Installation Support Jack for Stability
  To have a support, we normally use a second set of hands because that is the safest and easiest option. When another set of hands is not available, an option is to use the Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2 # UF19-960002 to adjust the height of the hitch and support it. I recommend using straps like # IMF12637 to also secure the hitch to the supports if you use these supports.
  view full answer...
• RV Hitch Carrier for Transporting Honda 7000W Generator
  We offer lots of hitch-mount cargo carriers and for use with a larger generator like the Honda 7000W (which has wheels) I suggest a ramped carrier. The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR offers interior dimensions 48 long x 28 wide x 5 tall. It also has a 500-lb capacity and includes an anti-rattle device. For an anti-rattle hitch lock use part # 63232. You'll also need some type of tie-downs to secure the generator to the carrier. I suggest...
  view full answer...
• Comparing Draw-Tite Trailer Hitches for 2018 Ford Edge Titanium & Edge Tongue Weight Capacity
  Let's start simple, which is the difference between the Draw-Tite Trailer Hitch # 75234 (square tube) and Draw-Tite Trailer Hitch # 75214 (round tube) that fit your 2018 Ford Edge. The difference is mostly just in the aesthetics, with the square tube hitch having a concealed crosstube, and the round tube hitch having a visible crosstube. The square tube hitch also has a higher overall capacity of 4,500 lbs towing and 675 lbs tongue weight compared to 4,000/600 of the round tube, but since...
  view full answer...
  
• Is There a Motorcycle Carrier for a 2017 Honda Accord
  All of the trailer hitches that fit your 2017 Honda Accord are 1-1/4 receivers. I've linked our selection of carriers that fit the Class I hitch for you. The lightest of them is Curt # C18145 that weighs about 29 pounds. This is important because your Accord has a tongue weight capacity of only 100 pounds according to the owner's manual. So with a roughly 30 pound carrier you're only allowed another 70 pounds on the Accord. You didn't say the weight of the bike but I think it's safe...
  view full answer...
• Waterproof Cargo Bag For Smaller Cargo Carrier
  I would recommend the Rhino-Rack Rooftop Cargo Bag Part # # RRLB200. Although it is listed as a rooftop bag, it provides the dimensions, size, and tech you are needing to accommodate your carrier. It has dimensions that are just a little wider and longer than your carrier, but not too much to have overhang of the bag. It is 55"x19.5"x11.5" in dimension. It is waterproof, not just water resistant, this will help protect your valuables and cargo from the elements during trips. I suggest...
  view full answer...
• Trailer Hitch for 2015 Subaru Impreza Hatchback
  While there is a hitch that will fit your 2015 Subaru Impreza hatchback with a single exhaust, the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 will only work if you have the knock-out panel in the center of the rear fascia (bumper). Since you mentioned you do not have that the only option will be to use a different trailer hitch, the Draw-Tite Sportframe Trailer Hitch Receiver # DT24959, which is still going to be hidden very well under the bumper. I have added a link to a video...
  view full answer...
• Strap Recommendation for Securing Rear of Sea-Doo to Trailer
  What you are looking for is a transom strap. We have the BoatBuckle Kwik Lok # IMF17631 which is 2 feet when fully extended that would work well.
  view full answer...
• Where on Trailer Frame to Measure for Adjustable Width Trailer Hitch for RVs
  Thanks for all those measurements! There is a trailer hitch that will work great for your travel trailer, though the measurement you want to go with is from outside to outside, which you said was 70-1/2 inches. That means the correct hitch is the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This is a Class III hitch with a 2" receiver and 350 lb tongue weight capacity so you will be able to carry a good deal of cargo with it. For a cargo carrier on the rear...
  view full answer...
  
• Trailer For Mobility Scooter Hauled by 2011 Toyota Camry
  You are correct that your 2011 Toyota Camry will have a hitch with a 1-1/4" receiver such as the Class II Draw-Tite # 36416, as that is the only size hitch made for this car. Since you are looking to pull a small trailer with this car you will need wiring, the T-One Vehicle Wiring Harness # 118482, to power your trailer lights. This hitch also requires Drawbar for 1-1/4" Hitch # 36071 and 1-7/8" Hitch Ball # 19256. The reason you want that size hitch ball is because the best option we...
  view full answer...
• How Does the MaxxHaul Ladder Rack # MT70233 Fit on a Deck Rail System on a 2019 Toyota Tacoma?
  I have a solution to the issue. The reason why there seems to be confusion about the fitment of the MaxxHaul Side-Mount Truck Bed Ladder Rack - 250 lbs MT70233 with your 2019 Toyota Tacoma (5-ft. Bed with Deck Rail System) is because the MaxxHaul ladder rack is not compatible with the deck rail system on your truck. The MaxxHaul MT70233 only fits 5-ft and 6-ft beds without that system. For a great alternative that will work with your rail deck system, I recommend the Thule TracRac TracONE...
  view full answer...
• Can Cargo Carrier be Used Behind an RV
  There is a cargo carrier you can use on an RV but it is recommended it be one with a completely solid shank as opposed to one which folds and tilts; the reason for that is the amount of movement at the rear of an RV will be much greater than the back of a passenger vehicle and a solid shank will give your carrier the added stability to handle that much movement. The cargo carrier I recommend is the Curt Cargo Carrier # C18152 because like the etrailer.com Cargo Carrier it measures 60"...
  view full answer...
• Can etrailer Cargo Bag # 988501 Work with Stromberg Carlson Cargo Carrier # CC-100
  The etrailer Cargo Bag # 988501 actually comes with steel rings (one for each strap) so that you can still secure the bag to cargo carriers without a rail like your Stromberg Carlson Cargo Carrier # CC-100. You can add more security with ratchet straps like part # IMF12637.
  view full answer...
• Rhino-Rack Rooftop Cargo Tray for Installation on Yakima Round Bar Rack System
  The two sizes of Rhino-Rack Pioneer rooftop cargo trays, parts # RR42114BF (48 x 38) and # RR42115BF (58 x 47), will fit on round Yakima roof rack crossbars. These Rhino-Rack brand rooftop tray-style carriers are shown on the linked page. Both work on round bars thanks to included universal-fit hardware. You will need cargo tie downs to secure your cargo to the tray. We offer all sort of tie down straps to keep your cargo safely secured to the tray. I linked our page for cam-buckle strap...
  view full answer...
• What Folding Tonneau Cover and Ladder Rack do You Recommend for My 2022 Chevy Colorado?
  For a great folding tonneau cover for your 2022 Chevy Colorado (5-foot bed), I recommend the BAKFlip FiberMax Hard Tonneau Cover - Folding # BAK126126. The FiberMax is made of 1/2" thick, fiberglass-reinforced polymer panels. It also comes with hair cell texture which helps with durability in the sunlight or elements. As far as installation, it does not require drilling and attaches inside your truck's bed rails. If you are looking for a compatible ladder rack with the FiberMax, I recommend...
  view full answer...
• Recommended Trailer Hitch Receiver, Cargo Carrier, and Roof Rack for 2018 Mazda CX-5
  For your 2018 Mazda CX-5, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76138 which is a 2 inch receiver rated for up to 675 lbs tongue weight. This is an easy installation with no drilling required. I recommend using the GY39FR for this hitch to give you anti-rattle stability for your cargo carrier. For your cargo carrier, I recommend the 24x60 Curt Cargo Carrier # C18151. This steel carrier is rated for up to 500 lbs and has the option to fold up close to the vehicle...
  view full answer...

Do you have a question about this ATV-UTV Tie Down?