Flange Wheel Nut - 5/8"

See what our Experts say about this Dexter Accessories and Parts

• Is Dexter Flange Wheel Nut 95188 Sold Individually
  Dexter Flange Wheel Nut # 95188 is sold individually so you will need to order the specific quantity you want when placing your order. The nut has an inside diameter of 5/8-inches,18 threads per inch and it is shown in the linked photo.
  view full answer...
  
• What Size Socket Fits Flange Wheel Nut - 5/8" Item # 95188
  I went out to the warehouse with a handful of sockets to see which size fits over Flange Wheel Nut - 5/8" Item # 95188. It takes a 1-1/8 inch socket. I have linked a video review of this nut for you.
  view full answer...
• Flange Lug Nut Recommendation for Trailer Wheel that is for Wheel Piloted
  For trailer wheels that are wheel piloted like it sounds like you have what you'd need is a flange wheel nut like the part # 95188 which is for stud diameters of 5/8 inch.
  view full answer...
• What is the Overall Flange Diameter of Dexter Flange Wheel Nut # 95188
  I went to our warehouse and pulled a sample of Dexter 5/8-inch flange wheel nut # 95188 so that I could measure its dimension for you. The overall outside diameter of the flange (the widest part) is 1-9/16-inches. The overall length is 1-inch. These dimensions are shown on the linked photo that I prepared for you.
  view full answer...
  
• Recommended 5/8 Lug Nut with 18 Thread Pitch
  I may have a solution for you, but we do not have a locking lug nut with those specs. However, you could use the Dexter Flange Wheel Nut - 5/8" # 95188 which has an 18 thread pitch, which has the specs you're looking for, but it is not a locking lug nut. This would be the closest solution that we have available. If you're looking for added security for your trailer you may want to consider the The Wheel Club - Tire and Wheel Lock # WI490, which will give you the added security you're seeking....
  view full answer...
• Lug Nut Nuts for Dexter 10K Axel
  For the Dexter 10K axles a 5/8" wheel nut # 95188.
  view full answer...
• Can the Lionshead Steel Dual Wheel # LHHA420 be Used on a 1976 Barth Motorhome with Alignment Ring
  The Lionshead Steel Dual Wheel # LHHA420 is an excellent option for a replacement wheel on your 1976 Barth Motorhome. This wheel has a 5-1/2" offset and is hub piloted which means that it centers on the hub and not the lugs. For this application you need a flange wheel nut like part # 95188. What it looks like that alignment rings does it change the wheel from being hub piloted to lug piloted meaning that it centers on the lugs. This wheel has a 4.77" pilot diameter so if it doesn't...
  view full answer...
  
• Does Dexstar Steel Dual Trailer Wheel # AM20790 Require Flange Nuts
  With the Dexstar Steel Dual Trailer Wheel # AM20790 Dexstar requires the use of flange nuts in the size of 5/8"-18 like part # 95188. I can't recommend an acorn style of nut.
  view full answer...
• Will 4.75 Pilot Hole Fit with 4.75 Hub for the Dexstar Dual Wheel with Offset # AM20783
  Generally if the hub has studs on it then it is stud piloted but if you secure the wheel to the hub using bolts then it is hub piloted. Since you are using dual wheels it changes things a little bit. The Dexstar Dual Wheel with Offset # AM20783 that you referenced is designed to fit on a dual wheel setup that is hub piloted. This means that the studs come through the back side of the hub and extend through both wheels and you use a 5/8" flange nut, like part # 95188, to secure it. Hub...
  view full answer...
• Which Lug Nuts To Use on 17.5" Trailer Wheels
  You can't use conical/tapered lug nuts like the # 12CLN on wheels with flat bolt seats; instead you'll want to use a lug nut with a flange like the Flange Wheel Nut - 5/8" # 95188. If you can tell me which wheels you've got and the lug bolt size, I can confirm this is the correct part for you.
  view full answer...
• 16" Dual Wheel For Inner or Outer Mounting
  We were not familiar with the term "coin in coin out" but are guessing that you mean the wheel can be used as an outer or inner wheel. If so we have the Dexstar # AM20783 16" Dual Wheel. Steen wheel with 8 on 6.5 bolt pattern and 4.75" pilot hole, powder coated white on a hub piloted design using Dexter Axle # 95188 flange wheel nuts. Select # AM20783 for white finish with 4.88" pilot. If you need a different wheel spec' just email me back with the details.
  view full answer...
• Availability of 5/8 Inch Flange Nut
  We have two options available for 5/8" flange nuts. We have the Flange Wheel Nut - 5/8" # 95188 with an overall flange diameter of 1-9/16" which is commonly used on hub-piloted trailer wheels. We also have the Dexter Dual Trailer Wheel Lug Nut with Swivel-Flange - Metric - Qty 1 # 6-118 which has an outer diameter of 1-5/16" and is designed for semi-trucks with 22.5" and 25.5" wheels.
  view full answer...
• Which Lug Nuts To Use On A 10K Dexter Axle
  The Trailer Wheel Lug Nut # 6-109 will not work with Dexter 10 K Axles, Instead you will need the Flange Wheel Nut # 95188. These lug nuts are commonly used on hub-piloted trailer wheels. The flange nut fits a 5/8 inch wheel bolt. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you in your towing endeavors.
  view full answer...
• Rotating Flange vs Non-Rotating Lug Nuts
  I spoke with one of my contacts at Taskmaster. I was advised that wheels like the 17-1/2 inch Taskmaster Steel Dual Wheel # 1750275WD4 can use any lug nut on them as long as they are flanged.
  view full answer...
• Trailer Wheel Recommendation for Car Hauler that is 17.5 inch Diameter for High Capacity Towing
  For the amount of weight you are towing and the mileage you are putting on your trailer you are going to want to go to the larger 17.5 wheel size. The part # TA56VR has a 6,005-lb max load at 127 psi. You'd need to have a hub piloted style hub that uses flange wheel nuts like the part # 95188 and has a bolt pattern of 8 on 6-1/2 inches.
  view full answer...
• Spare Tire for Big Tex 16 ET Trailer
  Based on my research a Big Tex 16ET trailer uses a 17.5" x 6.75" wheel with an 8-bolt lug pattern and uses ST215/75R17.5 load range H tires. The Provider 215/75R17.5 Radial Tire w/ 17-1/2" Silver Mod Wheel # TA95ZR you referenced is a 17-1/2" x 6-3/4" wheel which has an 8 on 6-1/2" bolt pattern and has 215/75R17.5 load range H tires, so this wheel and tire combo will work for you so long as you are certain your Big Tex has that bolt pattern (if you are unsure you can take a look at the...
  view full answer...
  
• Could Provider 235/75R17.5 Radial Tire w/ 17-1/2 Wheel # TA56VR Easily Replace Trailer Wheel
  The Provider 235/75R17.5 Radial Tire w/ 17-1/2" Solid Center Wheel # TA56VR that you referenced could easily replace what you have on your trailer but only if your current setup is hub-piloted and the current wheel has a center hole diameter of 4.76 inch. This wheel is held on with flange nuts that are 5/8 inch like part # 95188. If this is what holds your current wheels on and your pilot diameter hole is 4.76 inch this would work well as a replacement. I attached a review video for...
  view full answer...
• Can Dual Wheel Trailer Change From 16-1/2 to 16 Inch Wheels
  You can change from 16-1/2 inch to 16 inch wheels for a dual trailer wheel set up. You will need a new tire size though as tires need to have the same inner diameter of the wheel in order to fit. So long as you have an 8 on 6-1/2 bolt pattern, you can use the following dual wheel 16 inch wheels. - Load Range E (3,100 lb Capacity): Provider ST235/80R16 Trailer Tire with 16" Silver Dual Wheel # TA95FR This is a hub-piloted wheels so you will need wheel nuts to mount them, 8 of the Flange...
  view full answer...
• Can Trailer With 10,000 lb Axles Switch from 16-1/2 to 17-1/2 Inch Wheels and Tires
  Yes, you can switch from 16-1/2 inch to 17-1/2 inch wheels and tires on your equipment trailer with 10,000 lb axles. You just need to make sure the wheels have the same bolt pattern and work with the wheel bolts size of your hub and you're good to go. For example, the Provider 215/75R17.5 Radial Tire with 17-1/2" Silver Mod Wheel # TA95ZR has a 4,805 lb capacity, an 8 on 6-1/2" bolt pattern and needs a hub with 5/8" wheel bolts. I have added a link below to our entire selection of 17-1/2"...
  view full answer...
• Flange Wheel Lug Nuts for a Hub-Piloted Taskmaster Solid Center 17-1/2" x 6-3/4" Rim
  This hub-piloted wheel has a 6,005 lb capacity and for that I recommend the Flange Wheel Nut - 5/8" item # 95188.
  view full answer...
• Lug Hole Dimensions of 17-1/2 Inch Taskmaster Solid Center Wheel
  The Taskmaster Solid Center Wheel LT2524SP (discontinued and replaced by the part # TA45ZR) has a 5/8" lug hole size. You'll need to use a 5/8" Flange Wheel Nut # 95188 to secure the wheel to your trailer hub.
  view full answer...
• Option For 235/75R17.5 Trailer Tire & Wheel
  We have a single option for a 235/75R17.5 trailer tire and wheel, from Provider: - Provider 235/75R17.5 Radial Tire w/ 17-1/2" Solid Center Wheel # TA56VR The rim on this is 17-1/2" diameter x 6-3/4" wide as we don't offer a 17 x 8, and it has an 8 on 6-1/2" bolt pattern. It is a load range J with a 6,005 lb capacity and a hub-piloted wheel so you'll need flange nuts to install, with the proper one being the Flange Wheel Nut - 5/8" # 95188.
  view full answer...
• Correct Lug Nuts for the Taskmaster Steel Dual Wheel # 1750275WD4
  The 17-1/2 inch Taskmaster Steel Dual Wheel # 1750275WD4 requires the use of a 5/8 by 18 lug nut that is flanged. This is found as part # 95188 on our site. The part # 6-118 that you referenced is designed for use on semi trucks with 22.5 and 24.5 inch wheels and has metric measurements so it may not fit as well depending on your mounting bolt size.
  view full answer...
• Determining If a 15" Trailer Wheel is Hub Centric Or Lug Centric
  I was able to find the Aluminum Hi-Spec Series 6 Trailer Wheel # AM22652B that is 15" in diameter and has a 4.13" pilot hole that may work for your application. First I recommend checking your hub to confirm if you have a hub centric or lug centric hub. If your wheels are held on with tapered Lug Nuts # 12CLN your hub and wheel are lug centric and your pilot hole can be larger. If they are held on with Flange Wheel Nut # 95188 you have a hub centric wheel and hub and will want to ensure...
  view full answer...

Do you have a question about this Accessories and Part?