To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Finally got warm enough to tackle this hitch. Went pretty well, but the dimensions they show on the sheet that came with the hitch are a little off (heat shield and bottom panel.) I could tell the guy in the video was cutting in places a couple inches off from the instruction sheet. I could have taken a little bit less off the heat shield and maybe moved the slot on the bottom panel over about an inch. For the bottom panel, I just forced it on there and after replacing all the screws, removed what was still interfering with a utility knife. I installed this by myself, with the help of a jackstand, and the Pacifica backed up on my oil changing ramps. I have attached a couple of pictures.
It is a very solid hitch. It took about 4-5 hours to install and put everything back together. I encountered a small bolt from the cargo holder prevented attaching the hitch. I ended up just unscrewing the nut and snipping the bolt because there was not easy access to completely removing it. The fit is very snug and you almost have to put all the bolts on at once. This eould be a whole lot easier with 2 people and being able to have access to a mechanic shop to raise the whole car. But it was just me doing the work. It had to attach one side and make sure the nuts are just barely attached. Also needed to first attach the bolts toward the front of the car first. The bolts were a tight squeeze and will not go in otherwise. The provided fishwire came in very handy. Make sure when you remove them from the bolts tto unscrew them. I ended up reattaching them as i wrestled with the install. Hovever, the hitch had 6 holes and the Pacifica had 6 holes but only 5 bolts were provided and instructions were for 5 bolts. Overall it is a solid hitch but was difficult to install solo.
This is a great hitch and installation was simple especially after watching etrailer's videos! I later installed another on my buddy's widow's van.
Brooke M.
3/17/2025
So happy to know our videos were helpful! And that is awesome of you to help out your friends widow. Im sure that doesnt go unnoticed or unappreciated by her either :)
The product was exactly as described. It seems to be of very high quality and still looks great. This is probably the 5th hitch I have purchased from this site and all have been excellent
James 
4/14/2025
It’s still performing exceptionally well, no rust!
Good value, installed easily and fit correctly. After living with the hitch installed for a year I appreciate how it’s tucked up so when you go up steep inclines it doesn’t scrape the ground
the tow bar is of great quality. I'm well please with the e98903 receiver I ordered.
Gwendolyn Y.
3/6/2025
Love to hear it, Ronald! What are you going to be using on your hitch?
Think this is the fourth hitch we have purchased from you and all four have fit and performed perfectly. Your customer service personnel and prompt actions have been great. Thank you. The latest for our new Pacifica was more difficult due to the panels covering the bottom of the vehicle however your videos helped in that.
Jacob
9/25/2024
Perfectly, just like the other three we have bought from you.
Great price straightforward instructions. If you’d like working with your hands, this is the way to go. I got a quote from U-Haul for a hitch. They wanted $600.
Good instructions. Good fit. All the pa rts.
The hitch installed in 3 hours. the video was essential to helping out with the instillation.
Quality hitch with good instructions on how to install from etrailer.
Hitch fit fine. However my 2023 is different than what trailer has in there installation video. Ex: my heatshield is part of the underneath panel , not separate. Instructions for trimming did now match. I had to custom cut mine.
Hitch has worked great, glad I got it.
Gary
4/18/2025
Hitch has been great!
Recommended by neighbor. Works great and with your videos very easy to install.
Brooke M.
3/17/2025
Glad to know our videos were helpful! Thank you very much :) What will you be hauling with the new hitch?
Great product. Everything we needed was in the box and the instructions were detailed.
Great product that was delivered fast. Video was incredibly helpful and easy to follow. Saved $800 doing it myself.
I picked Etrailer hitch because they had a simple install video where I able to see the hitch on the actual vehicle. I trusted the product because it was their own. I easily even reached an actual person when I had a question. I have only used the hitch to haul bikes
Hitch Worked well last summer, basically never used fall or winter. Hitch still looks nice as opposed to the curt unit on last car that began peeling and surface rusting after one winter (New England, dirt road, salt and other melting agents).
Mike
6/23/2024
Still Looks great. Hard to believe it is 2 years old. Isnt used for heavy towing, bit it sees frequent in and out service all summer. No complaints and would absolutely buy again.
Had to pry a bit but fit well overall!
Good quality. Fit was perfect. I like that it only requires a slit cut out of the lower cover.
Product fit perfectly for my 2021 Chrysler Pacifica. Instructions were a bit difficult to understand but the video provided through your website helped greatly! Hitch receiver worked well with our bike rack for our ebikes.
Things are going well. Just installed y esterday.
After paying returns shipping for the wrong product. This one fit well and the instructions were easy to follow for installation. Highly recommend the video the company links to the order.
Very quick delivery Pleased with my Pu rchase
Victoria H.
3/1/2025
That's great Steve! What are you towing?
Solid and good paint job. Went in with no problems. Followed instructions that came with the hitch and watched the video. Pic is with a bike rack mounted.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Brooke M.
6/19/2025
I appreciate your honesty and the photos you sent in too. It's super nice for others to be able to read this and at the very least be on the lookout for the discrepancy you came across, too. Thanks Mark!