To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once you've plugged in the T-connector, insert the included 10-amp fuse into the integrated fuse holder. Then install the 30-amp cartridge fuse and two 7.5-amp mini fuses in the rear fuse panel.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (112 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Installed myself in about 15 minutes, connects to rear fuse panel in driver side rear cargo compartment of 2019 Honda Odyssey. There is enough room to fold it up and stow it behind the fuse panel door, out of sight until it's needed. I don't use a trailer very often, but as cheap as this kit is, having the ability to connect a trailer and its lights was a no-brainer.
Great price - easy to install- only wish the cable was longer to run outside the car. Fortunately there are extension cables available.
mark d - 08/22/2022Total installation was about 3o minutes and works perfectly. Great instructions made it quite simple. Far cheaper than having it done. Recommend getting a traier test light plug.
Gary - 03/12/2022Working great on my BMW e46 xiT. Pretty easy install if you have a voltmeter and a brain.
I rec’d email from Carol C at Etrailer at 7:01pm devising my order had been delivered and a link to this survey. I responded at 7:02 I had not rec’d my order.I did not expect a response. At 7:18 I rec’d another email advising they had called UPS and the order was left by the shed at the road. I found the box there. This is Customer Service at it’s finest? My second order from etrailer, and won’t be my last!
Mike L - 12/17/2021Once installed, no muss no fuss - what can be better?
Following the instillation instructions was straightforward and resulted in a very cleanly installed unit.
easy to install and works great
Instructions were legit and helped tremendously to make this a quick and easy instal in my 2021 Honda Odyssey!
Dustin - 11/06/2021Literally plug and play
Install was easy. All the components that you need are there and then some. Would be great if the harness was outside of the vehicle, but I guess that's on Honda.
Happy with purchase. Easy to install- wish it would have come with a bracket or mounting plate to attach the wiring harness to the hitch frame.
Install was easy. It was basically plug and play except for attaching the ground. I keep the trailer wire hidden behind the rear fuse box access panel and bring it out when I need to hook up the trailer. It is no problem closing the hatch on the wire as long as you keep it away from the latch. Everything works fine with the trailer lights.
This wiring harness was easy to install and works perfectly. I've seen alternatives which require feeding wires all the way from the engine bay, and that is totally nuts. Don't waste your time and energy. This installs from the rear corner, right where you're already working on the hitch install. Choose this item -- it's perfect.
Very very good service. Can’t find that everywhere these days
Great plug & play harness. Would definitely buy it again.
Installed easily. The only thing is that the four pin plug wire is about one foot too short.No reason to be that short.I could not get the two sided sticky foam pad to stick to any part of the car
Easy to install system as shown in recommended installation video. I used it to haul a 6x12 trailer I rented from a U-Haul. Haven’t tucked the wiring and harness away to look professional yet.
Installation went smoothly. Instructions were clear and easy to follow.
Super easy install with the help of your installation videos. Don’t be intimidated, do it yourself and save the dough!
This wiring harness was easy to install, if you follow the video.
Works as expected.
Thought the wire to the trailer was a little short, but when installed it was at the correct length.
I'm quite happy with the Curt wiring kit. It took me about 25 minutes to install and didn't have too many pieces to hook up. You also don't need to splice wires or run a wire up to the battery. The van already came setup to plug the cord in and use it. I have the vacuum cleaner in my van and that made it a little tighter to work, but it still worked out great. I tested it out on the trailer and everything worked perfectly.
Instructions were not good, but U-Haul had a great youtube video. Also, you should include that you have to buy to hold wires to trailer hitch. But worked good.
Wow is all I can say! Several friends recommended etrailer.com and I will happily do the same. I ordered the products, I recived a confirmation email (from a human) that it was packed up and shipped to me. It arrived error free and packaged well. I logged in and instruction videos that were just what I ordered (no searching for what I needed) were spot on and easy to follow. I am beyond impressed from start to finish
and the best part is its on and we are towing! A big thank you to the etrailer.com people that put this together for me!
quick install....helpful video & instructions ...good price & fast shipment. This is my 3rd harness & hitch install from e-trailer in 5 tears...with no problems.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.