To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
I have a 2022 nissan pathfinder fit with no issues! The only reason I didn't give 5 star is due to the chain hookups. Wish they would have been solid metal instead of wielded ring.
Fast shipping and product was easy to install bolts lined up perfectly easy. Only thing is the instructions say you have to take off the exhaust you don’t need to because it lines up perfect
Price was very good for the receiver and the wiring kit. Delivery was very fast and the hitch was packed very good and secure in the box. Unfortunately the installation was somewhat difficult, because the mounting holes on the receiver did not align right with the frame of the vehicle.
I am an accountant by trade so I enlisted a friend to help me with the trimming of the lower bumper panel. It took us longer than the video to install but overall I am very happy with the hitch receiver. The packaging on delivery was damaged and open but there was no damage (all bolts & washers accounted). This is not my first hitch receiver. I rated this based on price, quick delivery and the quality.
Kenneth
3/5/2025
The receiver has a great addition to the Pathfinder. We mainly use it with our cargo carrier but potentially we may add a small trailer or bike rack into our inventory.
Robin H.
3/5/2025
I struggled with getting the last bolt in and finally used a drift pin punch to align the hole and that did the trick...
Absolutely love the new hitch!
Great hitch, great easy, smooth transac tion
Fit with minor trim to plastic under bu mper
worked well, took a bit to trim the plastic bumper, wife was a little worried about me cutting on her $60,000 car with a sawzall, but it all worked out!
Well built product
Very easy to install. It is heavy so I recommend 2 people. My brother and I had it installed in less than 30 minutes including removing a small portion of the underside of bumper with a dremel.
One bit of warning since it is lower than where the factory hitch would be I do scrap the hitch from time to time when on a steep incline or decline, like a steep driveway or a parking garage. The scrap is jarring to hear inside the car but the hitch is fine and keeps going. I recommend pulling into steep driveways at an angle, haven’t scraped since.
Jenny N.
1/4/2024
Keeping the hitch at an angle does the job, however I recommend considering part # RM-050 which is the Rollaway hitch protector from Roadmaster. It can help with vehicles where the hitch is lower to the ground.
Good product, with only one complaint. I was only able to screw in 5 of the 6 bolts on the 20205 Nissan Pathfinder I installed it on. Given the size and location of the holes on the hitch, you can only screw in 5 bolts and the 6th will be slightly out of line with the female end on your vehicles frame therefore not allowing you to screw in the 6th and final bolt. I am sure it will be strong enough with 5/6 but still kinda annoying and makes you wonder how they missed that when they were engineering the hitch?
Kate F.
10/29/2025
I am sorry to hear that the 6th hole did not line up, you definitely want to use all the provided hardware Beau. Is the hole not lining up from front to back, or from side to side like it is flexed out of place? The hitches are made to be able to flex, so that it doesn't damage the frame of the vehicle, I am trying to figure out if they put the hole out of place, of it the hitch was flexed out of position.
Easy to install and look super clean
The holes were something else to get lined up. Got 5 out of the 6 bolts in. Good instructions. Sturdy product
You need to supply a small paper template for the cut out of the rear plastic piece and also the last two holes in the mount need to have more of a slot in them to allow for more of an easy install so that you dont have to drill some space in the slots. We all don't have car lifts .
Took about two hrs to finally get the last bolt to work, but otherwise i like the hitch. First 5 bolts took half hour.
Great product, we have been relying on this hitch for over a year now and no complaints
Holes in hitch did not match up perfectly with holes in the vehicle.
Heather A.
9/27/2024
It sounds like you got a flexed hitch. It's pretty common for the steel of the hitch to become flexed in shipping. The good news is, its fixable. Check out this help article.
Helpful Links
Installed on a Pathfinder 2023,The package arrived on time and Everything went as explained in the video.
Great Service and Product.
Excellent service and product. It came right away and fitted perfectly . Was installed in 10 minutes!
Fit was right quick and easy
Exceeded my expectations with delivery, customer service is great.
Fits great and was shipped very fast. Attached to my 2023 Nissan Pathfinder no problems. Very quick install. Video was very helpful.
Love it!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
3/5/2026
Looks awesome, Ben! Looks like you're using it to carry a bike rack?