Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ideal for the rigors of off-road towing, this fully articulating coupler pairs with a vehicle-side Lock N Roll hitch (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain. Welds onto your A-frame trailer.
Features:
Specs:
This coupler combines with a Lock 'N' Roll vehicle-end hitch (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road. It's more secure than a traditional ball coupler, and it's more comfortable and quieter than a pintle setup. The Lock 'N' Roll connects quickly and easily, and can adapt to any towing conditions.
When using a traditional ball coupler, it can be hard to tell if the coupler is fully latched around the ball. You can head out assuming the connection is secure, only to have the trailer pop off of the ball and disconnect while you're towing. With the Lock 'N' Roll, that won't happen.
This unique coupler is designed to interlock with a matching vehicle-side hitch to form a tight, secure connection. Unlike on a ball coupler, the latching components on the Lock 'N' Roll system are easy to see, so you can tell at a glance if the connection is secure.
Once secure, the Lock 'N' Roll setup offers a wide range of motion, which makes for a smooth ride. Because of the articulating action of the combined coupler and hitch, the Lock 'N' Roll connection can handle the harsh bumps and road shock that could otherwise stress and potentially damage a ball coupler.
The Lock 'N' Roll connection also makes your trailer less vulnerable to theft. Unlike a traditional ball coupler, which is compatible with any hitch ball of a matching size, the trailer-side Lock 'N' Roll coupler can only connect to a vehicle-side Lock 'N' Roll hitch. So your trailer cannot be towed away unless it's connected to a vehicle with a Lock 'N' Roll hitch installed.
With the Lock 'N' Roll, you can have peace of mind knowing your connection will not come apart or succumb to damage caused by road shock, nor will your trailer be vulnerable to theft.
The pintle hitch connection is the most common setup when towing off road because of the flexibility in the connection. But that flexible connection can also result in a lot of slop. This can cause uncomfortable jerking as well as rattle and noise. In addition, when using a pintle/lunette ring setup, it can be difficult to back up your vehicle and trailer without jackknifing. And it can be hard to disconnect at certain angles, which may be a necessity when overlanding.
The Lock 'N' Roll assembly, on the other hand, offers a close-fit, slop-free connection that's designed for off-roading. This close-fitting design provides a smoother ride than a pintle/lunette ring connection with less rattle. It also makes it easy to back your vehicle and trailer up without jackknifing.
With the trailer end and vehicle end combined, the Lock 'N' Roll setup also creates a fully articulating connection that's great for off-roading. The bearing that's built into the vehicle-end hitch allows for 360 degrees of rotation, which means that your trailer could actually roll all the way over and not take your vehicle with it. The connection also pivots side to side and up and down, making it easy to take rough trails without jarring your setup. This also allows for fast and easy disconnection, even at extreme angles.
Each Lock 'N' Roll setup requires 2 parts - a trailer end and a vehicle end. Together they create a strong, secure connection. To connect, just line up the trailer end and vehicle end together and place the outer metal tabs of the trailer-end coupler into the hooks on the vehicle-end hitch. Then fold the latching plates on the vehicle-end hitch down and secure them in place over the tabs using the pin and clip included with your vehicle-side hitch. With the latching plates secured, the Lock 'N' Roll assembly will stay firmly connected.
When the trailer-side coupler and vehicle-side hitch are secured together, they form an articulating assembly with 3 axes of directional motion. The uniquely designed bearing on the vehicle-side hitch allows the connection to rotate a full 360 degrees. The trailer-side coupler's hinge allows the connection to pivot to the left and to the right. And when the 2 sides are joined, the tabs will roll inside of the hooks so that the entire assembly can tilt up and down.
Towing with the Lock 'N' Roll is easy, and it gives you a connection that's both flexible and secure.
Get Maximum Security Locking Pins
Get extra security for your trailer. InfiniteRule makes hitch pin locks (IR59FR - sold separately) specifically for this Lock 'N' Roll articulating hitch. You'll get two stainless steel locks: one with a 1/2" diameter pin, and one with a 5/8" diameter pin. These will replace the standard pins and clips on the driver-side and trailer-side of your coupler.
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
Ideal for the rigors of off-road towing, this fully articulating coupler pairs with a vehicle-side Lock N Roll hitch (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain. Welds onto your A-frame trailer.
Great product! I pull a 9 foot scamp with a 77 landcruiser and once on a tough road the scamp actually spun off the then ball connection and landed on its side. Made for an unpleasant afternoon!! Not any more. That articulating hitch lets the scamp twist to its heart content. Highly recommended this hitch if you tackle tough roads.
Massive overkill for my trailer and the car side interfered with my tesla model Y bumper (I was using it in the 'lift up' orientation) so I returned them. Very nice looking parts. As always, etrailer customer service is second to none!
Excellent! Works fantastic!
Awesome thanks no worries about trailer coming disconnected in a dip
After trying this system on my T@G off-road version teardrop I changed all my trailers to this (3 total) from the standard 2" ball. I've had my T@G through some rough trails and this system works excellent.
I highly recommend.
An excellent well made hitch. Hooks up easily, backs well, articulates as designed. No issues at all.
Product came on time for excited to get it. Welded onto the trailer and get some use out of it. It’s exactly what I’m looking for a very heavy duty should work excellent for my little camping trailer. Thank you for a speedy delivery.
Greatest invention ever ! the manufacturer builds a travel trailer that they sell with off road tires and promotes it as a off road trailer with a standard ball hitch. I was so unhappy with the trailer until I found this on etrailer.com It works great. Thanks etrailer !!
Jim S.
11/17/2020
great
Awesome product
After a 4 wheeling trip to Colorado I realized my ball and socket hitch was not adequate for pulling my trailer into the back country camping areas. One of the guys on the trip had a Lock and Roll coupler on his Jeep and it worked just as it was designed to. I ordered one as soon as I got home. We are headed back to Colorado in July and it will get a good workout. It’s also great not to have to worry about the old style hitch binding and breaking and leaving me stranded!
Fast shipping and fair prices. I'm always worried about getting my product shipped to me on time and I'm happy I used this site, it shipped fast and I was kept in the loop the whole time! :)
Zac
2/28/2022
Great
Great product
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gerard
10/28/2023
Still works well. Great hitch!