Will Lock N Roll Articulating Coupler # 336TS504 Fit 2018 NuCamp Tag Boondock Edition

Question

Question:

I have a 2018 NuCamp Tag Boondock Edition tear trailer and want to replace the standard ball socket coupler with this one. Will it fit? Thank you. :

asked by: JASON S

0

Expert Reply:

I looked up pictures of the front of your 2018 NuCamp Tag Boondock Edition and it uses a standard A-frame style coupler like what the Lock N Roll Articulating Coupler # 336TS504 is designed to fit so this would work well for you. You'd have to have your old coupler removed and this one welded in place of it.

For the shank that slides into the hitch of your vehicle you'd want the part # 336VS501 for a fixed height solution of the part # 336VS503505 which has a three height settings.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like you…

view full answer...

Answer 2

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 3

The Furrion Chill Replacement RV Air Conditioner for Dometic Brisk Setup - 15,500 Btu #FR42PV has multiple drain holes throughout the bottom of the unit. I've attached a photo from a Furrion tech where she highlighted all of the drain holes.

view full answer...

Answer 4

The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…

view full answer...

Answer 5

Hey, Ron. I see we have a 3-position (part #336VS503505) and a 5-position (part #336VS503515) Lock N Roll Articulating Hitch. I'll give you those weights below for you. If I'm some how missing the 6, just let me know the part number in a…

view full answer...

Answer 6

Hey Scott. The Lock N Roll item #336TS526 you were looking at isn't designed for that but I have something that is. For a 2-1/2 square tongue you'll want the Lock N Roll Articulating Channel Tongue Trailer Coupler item #336TS506. This will…

view full answer...

Answer 7

Hey Jonathan, thanks for reaching out! In the "Drop" position, the top of the Lock N Roll Articulating Hitch #336VS511 is 2-1/2" below the top of the receiver, but in the "Rise" position you're looking at about 4"…

view full answer...

Answer 8

Yes, the Lock N Roll Articulating Hitch for 2" Receivers #336VS511 does need the trailer to have a matching Lock N Roll coupler. The reason is the unique way the hitch and coupler attach, which allows the rotation and smooth ride you'll get…

view full answer...

Answer 9

One easy solution would be to have the Lock N Roll #336TS528 welded to your 2 inch wide trailer tongue if the bolt holes don't line up. This is the most common way to install couplers as lining up bolt holes isn't always possible.

view full answer...

Answer 10

Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll #336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the…

view full answer...

Answer 11

The correct Lock N Roll hitch assembly is going to depend on the size of the channel the coupler of your trailer sits on. You need about a 5" drop, and the closest is going to be the 4-1/2" drop Lock N Roll Articulating Hitch for 2"…

view full answer...

Answer 12

I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part #336VS503505 and they were not quite sure what measurements you are looking for nor was I. That said, I went out to our warehouse for you and jotted down a few…

view full answer...

Will Lock N Roll Articulating Coupler # 336TS504 Fit 2018 NuCamp Tag Boondock Edition

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching