Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8219,31241
Retail:$2,549.99
Our Price: $1,993.16
You Save: $556.83
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric winch raises and lowers plow with sturdy, nylon strap
- 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
- In-cab switch serves as a reliable backup to the remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 82" wide x 19" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Winch lift capacity: 3,000 lbs
- Weight: 265 lbs
- 1-Year limited warranty
The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8219 Detail K2 Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade
Item # K2AVAL8219
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31241
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 350 lbs
- Gross trailer weight: 3,500 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31241 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31241
Average Customer Rating: 4.3 out of 5 stars (57 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Ray01/02/2023
Great easy plow to use. The hardware that came in was missing a couple nuts and bolts. Had to run to the hardware store a couple times to get the proper bolts and nuts. The plow doesn't come assembled. So expect a good evening to build this unit. First two years was great and the scraping was good. Back dragging slacks but again a lot of plows do that. So it's not terrible but does enough. Just leaves 1/4 of snow behind. But pushing snow forward works and scrapes nice on asphalt or concrete. The battery that came with the kit for the wireless controller didn't last 1 month. So be prepared to upgrade that. But it's been now on my 3rd year, one of the springs failed on it and currently searching for the replacement. The plow itself has a one year warranty so of course it's past due now. Overall it works and it's nice. Wish I had bought the power left and right but the manual lever works too. Also the side markers prematurely failed too so I had to buy meyer yellow ones from fleet farm. Cost another $xx. But I will update this as time goes.
by: Daniel12/20/2022
It has been working very well as we have actually had a decent amount of snow so far this year. took a little longer than I thought it would to assemble and mount it but after it was on it works great and looks good.
by: Jet08/14/2022
I had the same issue most have with this item. The frame mount was too narrow, and mounting holes didn't line up. I had to use the Jack method to spread the mounting rails to fit.
After that it's awesome. I love this front hitch receiver on my truck, its very versatile.
by: JC G06/29/2017
2017 NissanFrontier
Curtis "Front Mount Trailer Hitch" ordered for 2017 Nissan Frontier (Crew Cab-4x4).
Excellent product quality, quick delivery, and follow up customer service. Hitch as advertised. As several other reviewers have mentioned, the front mount trailer hitch holes do not line up exactly with the truck frame holes so a bit of manhandling is required to get the bolts installed properly. I needed to be able to push my boat/trailer up my driveway, around a corner, and into the garage. Works better than I expected; very satisfied.
Jc G.
7/2/2018
Still all good. Works and fits my truck better than expected.
by: Les More11/19/2016
2016 NissanFrontier
I got this Class II front hitch for my 2016 Nissan Frontier to help me back a small trailer into a tight space. It arrived in good condition with complete instructions and good quality hardware. When I tried to bolt the hitch on, I found the 1/4" plate brackets were 3/8" too narrow to match up with the holes in the Frontier's frame. Michelle at ETrailer gave me some good advice on how to spread the brackets with a hydraulic jack and bingo, the hitch fits and looks great! BTW, the ground clearance is still around 9 1/2".
Les M.
11/19/2017
This hitch is well made, it will last for many years. Its also used for a push bar and my shade umbrella!
by: Matthew11/30/2023
Hitch is doing what it's supposed to do but 1 year in and rust is already starting. Otherwise it's good. I use it for mounting a plow
by: Jeffrey01/08/2022
2021 NissanFrontier
The service from etrailer was excellent! The only issue I had was I had to spread the flanges out about a 1/2 inch with a hydraulic jack to make the hole spread correct. This would be a manufacturer issue not the distributor. In the end I was able to install, and it works well with my home plow.
Thomas M.
1/9/2022
It sounds like your hitch may have been flexed during shipping. This can happen because the hitch is designed to flex with your vehicle once installed.
Helpful Links
by: Aaron01/23/2021
The DK2 plow and hitch are awesome! As always, the communication from Etrailer from order to delivery is top-notch. Assembling the plow and mounting the hitch was easy. Took about 4 hours with me enjoying a few beers and taking my time one evening after work. Took on wiring the next day. I like a clean finish, so this part took me about 2 hours. I placed the control module on the fuse block as suggested (etrailer's videos are a BIG help). I placed the remote transmitter on the drivers side. I ran the plow lead down to the hitch from inside the vehicle. There is just enough wiring supplied and this allows me to tuck the connector inside the hitch when not in use. A hitch cover protects it from the elements. First use was 30" of snowfall! I plowed for about 3 hours straight. The engine compartment did get warm which made the control wiring warm and pliable; so the connector came out of the control module mid way through plowing. I used some dielectric grease and it stayed connected the remainder of my plowing. It takes some practice to hitch up to the plow easily. This set up took a beating first time out. Sure glad I ordered it!!
by: William03/23/2021
2006 NissanFrontier
Well, I had the same issues as everyone else with this front mount hitch. when i went to mount the hitch the bolt holes would not line up. Most everyone else have been taking a file or something to widen the holes to make it work... but in doing that it makes the bolt head too lose to the bracket and cant get a socket on. so what i did, I got a 4x4 block of wood and a bottle jack to spread the mounting bracket apart. I had to spread the bracket about 3/8 inch. after that the holes lined up perfect..
Other then that issue, the hitch seems to be strong, thick and has good welds.
etrailer.com is excellent!! I've purchased several items from them. always fast shipping and been very happy. I will continue to purchase from them.
by: Lucas05/19/2024
Did not line up with holes like it should have. I had to really put some effort in to get it to match up properly. Other than that. It’s great.
by: Thomas 12/06/2023
Nissan
The front receiver for my Nissan truck fit well and was easy to install.
by: Julio07/17/2022
Don’t get me wrong it’s a great product. But in my case the hole needed to be shave and the side plate needed to in 90 degrees to fit in my frontier 2018.
by: Jim Richardson02/13/2015
2013 NissanFrontier
The distance between the flange bolt holes was too short. I had to use a hydraulic jack and 2 X 4's to spread the flanges to obtain the proper distance.
It's on and looks great. I am glad I didn't have to drill our any holes.
by: Kimber11/15/2022
1993 Chevrolet Suburban
The plow works very well. It's not real heavy duty but it has been adequate so far. It went together quite easily and is fairly light and maneuverable when I take it off for the summer. I am glad it has the extra turnbuckle braces beside the receiver to stiffen it up. I almost wish I had gotten a wider plow. When I have it set for straight forward it is good but when I have it angled it is a bit narrow for my Suburban. One minor problem I had was when I hit a hard object and the plow snapped forward and down both of the little red plastic end markers that stick up broke off. Long exposure must weaken the plastic.
by: Brad11/07/2022
Overall, I was satisfied. Instructions could be more complete, and it was missing a few bolts and nuts. But Looks like a solid plow for the application I need.
by: Johnny P.05/07/2020
Ordered my front trailer hitch about a year ago. I use it for my surf fishing rod holder/equipment basket. Driving on the beach it's nice to have your rods and bait cooler in the front.
I tried to install it myself, but the holes didn't line up exactly. Took it to a shop and they put it on for me without much difficulty. Took them 20 minutes. No drilling involved....they were just strong enough to feed the bolts through the holes well enough to mount the hitch.
I'd buy this again.
by: Scott02/09/2022
Well worth the money! No longer having to worry about someone else coming to plow is a God send!!!
by: Daniel08/19/2023
Good for the price, really needs to be able to be able to angle from the cab of the truck. (deluxe model.)
by: Mark 07/30/2023
Fast and the way it was described
by: Stephen09/17/2022
I bought this front hitch for my 2018 Nissan Frontier. The video looked pretty straight forward but after numerous tries the holes to mount the hitch were slightly off. After a year I finally took it to a mechanic to help me install it. We could not use the large washers that came with the bolts because we needed the extra space to get the bolts into the holes. Even then, to get the last bolt in, it took one person using a pry bar to help line up the hole while another person got the bolt in. I’m not sure if the hitch got slightly damaged during shipping. The holes to bolt to the truck frame were off about an eighth of an inch. In the end the hitch is mounted but wasn’t as easy as the video showed.
by: Jeff11/08/2022
Great customer service, poor fitment of hitch. Purchased hitch for 2019 Frontier with no body damage. The four mounting holes to attach the hitch to the truck frame were drilled at an diagonal angle. I had to expand them with a carbide bit-30 plus minutes. Hitch holes still did not line up with frame. I then stood the hitch up on its end, and used a lot of cribbing and a 10 ton bottle jack to expand the distance between the mounting arms a 1/4 inch to allow it to line up with the weld nuts in the trucks frame. Definitely not a 40 minute job like it states on the web site. Hitch is now mounted, but it was an effort to get it there.
by: Charles 11/10/2022
i placed this on my truck a year ago with a 9 ton winch on it i’ve pulled several stuck tractors on lots of 18” diameter trees and haven’t had a single issue with it. i will say that i need a lift kit on my truck because some side walks and what not are a little high and i do scrap the bottom of it. but it holding up well
by: Donald J01/11/2022
Jeep Wrangler
I love having this plow easy to install, easy to attach and remove on my 2 door Jeep Wrangler. I would recommend it to everyone looking for a plow.
by: Kevin 10/28/2022
Works great even better than the old fisher plow even though this one swings manually, the blade goes much higher when pushing up banks of snow.
by: martin w10/10/2013
2007 NissanFrontier
Good finish and appearance. Sturdy. Didn't fit though. Had to use a Hi-lift jack to spread mounts to get it to fit.
25
57
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Snow Plow Recommendation for 2019 Jeep Wrangler
- We have just what you'd need to install a plow on your 2019 Jeep Wrangler for the plow I recommend the Detail K2 Avalanche part # K2AVAL8219 which is 82 by 19 inches in size and comes with a winch setup to make raising and lowering the plow very easily from inside your vehicle. It has 3 blade angles it can be set at and comes with a wireless remote too.
To mount it on your vehicle the front hitch part # C31086 is a custom fit for your vehicle and is the hitch that Detail recommends
view full answer... - Will This Detail K2 Snow Plow Fit A 2016 F150 With A 4 Lift & 35" Tires?
- The Detail K2 Snowplow # K2AVAL8219 will fir your 2020 GMC Sierra 1500 even with the big 35" tires and lift. The potential issue is functionality. A plow attaches to your frame, which is now separated from your suspension by another 4 inches and then there's the distance to the ground depending on what size tires you're running. Using 35's will just make the distance even greater. That's where you'll see your plow not pushing properly. The plow needs to transfer and distribute loads back
view full answer... - Difference in Detail K2 Snowplow for 2" Hitches and the Detail K2 Elite Snowplow
- The Detail K2 Elite Snowplow for 2" Hitch, # K2AVAL8219ELT on your 2017 Nissan Frontier uses an electric actuator raise and lower the plow whereas the Detail K2, # K2AVAL8219 uses an electric winch.
The Detail K2 Elite Snowplow, # K2AVAL8219ELT has an internal clutch that prevents damage caused by overextension of the actuator. It also uses a chain instead of a strap on the other model.
For a front mounted hitch on your 2017 Nissan Frontier, I suggest the Draw-Tite Front Mount Trailer
view full answer... - Can I Plow Wet And Heavy Snow With The Detail K2 Snowplow For Residential Areas
- I did some research and I got the following information. You will have to be careful plowing wet and heavy snow with the Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall, part # K2AVAL8219. According to K2, "Your K2 snowplow is not intended to clear the snow deposits created by large municipal or commercial snowplows, which contain heavy compacted, frozen lumps of snow and ice, and could damage the plow and vehicle.
view full answer... - Detail K2 Avalanche Snowplow For 2004 Chevy Avalanche 1500
- I contacted Detail K2 snow plows and they have successfully mounted their plows on the 2004 Avalanche 1500. I recommend Detail K2 Avalanche Snowplow for 2" Hitches part # K2AVAL8219 and curt front mount hitch part # 31302. They do not have any notes stating any issues with the fit on a 1500.
view full answer... - Snow Plow And Hitch For A 2017 Ram 1500 Rebel 4x4
- The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 and the Curt Front Mount Trailer Hitch Receiver # 31374 will work for your 2017 Ram 1500 Rebel 4x4.
The Draw-Tite # 65062 has a line load capacity of 9,000lbs, and vertical load limit of 500lbs.
view full answer... - Available Front-Mount Hitch Receiver for 2007 Ford Explorer Sport Trac
- Only a front-mounted aftermarket hitch is offered for your 2007 Ford Explorer Sport Trac. This comes from Curt, part # 31545. This hitch has a 500-lb vertical load rating, making it a great way to add a snowplow like the hitch-mount Detail K2 # K2AVAL8219.
All aftermarket accessory items for your vehicle are shown on the linked page.
view full answer... - Will Agri-Cover SnowSport Front Mount Hitch Work With Snowplows on 1994 Jeep Wrangler YJ?
- The Agri-Cover SnowSport Front Mount Hitch A40163 for your 1994 Jeep YJ can work with some K2 plows, the Detail K2 Avalanche Snowplow # K2AVAL8422 which is 84" wide x 22" tall and weighs 283 lbs as well as the Detail K2 Avalanche # K2AVAL8219 which is 82" wide x 19" tall and weighs 265 lbs.
The Agri-Cover hitch will work with those K2 plows though it is designed to work with Agri-Cover SnowSport HD plows A40000HD which is 84" wide x 18" tall and weighs 114 lbs, A40040HD which is 96"
view full answer... - Recommended Snowplow to Use on a 2016 Chevrolet Silverado 1500 for a Personal Driveway
- For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part # C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82" wide x 19" tall. It has an electric winch so you can make all of your adjustments in-cab, adjustable blade for precision plowing, and a rubber deflector on top which diverts snow away from your windshield. The other thing I like about this plow is that
view full answer... - Compatibility of Hitch-Mount Snow Plow on 2013 Ford F-150
- We offer a range of 2-inch hitch-mount snow plows that can work on your 2013 or 2014 model year Ford F-150 so long as it has a front-mounted 2-inch hitch receiver. I know of no particular issues with using a snow plow on the later model F-150s.
If you need a front hitch for your truck you can use the link at right to select a 2-inch hitch. Since you did not specify whether you have a 2013 or 2014 I have included two links, one for each model year, that you can use to select your truck
view full answer... - Can you Install a Snowplow on a 2017 Ram 1500 4x4 with Electronic Steering Assist
- I spoke with all of the snowplow manufacturers we carry and none of them have ever heard of or had any issues with installing a snowplow on a 2017 Ram 1500 4x4. I would call the dealer to see if they say otherwise but I would not consider the statement to be true as all of the manufacturers state they have sold snowplows for this vehicle and have not heard back about the problem you described.
For your Ram, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 which installs
view full answer... - Parts Needed To Mount Detail K2 Snowplow # K2AVAL8219 On Front of 2020 Nissan Frontier
- The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver # 31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow.
I recommend adding the Timbren Front Suspension Enhancement System # TFXF1004A as it is specifically designed to help support the front suspension when using a plow. This will help reduce the amount of front end sag when carrying the plow.
view full answer... - Hitch and Hitch-Mount Snow Plow for 2010 Volkswagen Tiguan
- The Detail K2 Avalanche Snowplow for 2-Inch Hitches # K2AVAL8219 is intended to install into a 2-inch hitch receiver. In most cases a plow will be used on a front-mounted hitch but a rear-mounted hitch can also be used.
Rear-mounted 2-inch hitches are offered for your 2010 Volkswagen Tiguan, such as etrailer hitch # e98906, which is the one I recommend. This hitch installs without drilling but does require a bit of fascia trimming. All required hardware is included with the hitch.
view full answer... - Detail K2 Snowplow for 2001 Dodge Ram 1500 Sport
- All snowplow kits offered for the 2001 Dodge Ram 1500, shown on the linked page, exclude the Sport version from their fits. My technical contact at K2 advised that instead of a front-mount hitch you CAN use their Custom Mounting Bracket kit # K284309. This has no known compatibility issues with the Ram Sport according to my contact. With it you can use a plow like # K2RAMP8219.
view full answer... - Recommended Front Hitch for a 2019 Nissan Frontier
- Yes, there are. To add a front mount hitch to your 2019 Nissan Frontier you're going to want the Curt item # 31241. This front mount hitch has a 2" receiver and bolts to your Frontier with included hardware. This hitch has a line pull capacity of 9,000 lbs, a vertical load limit of 350 lbs, and it can pull a trailer weighing up to 3,500 lbs.
I really like this hitch because it mounts directly below the front fascia. I have linked an installation video below along with a couple of pictures
view full answer... - Does Curt Front Mount Trailer Hitch Receiver # 31241 Fit 4 Wheel Drive 2012 Nissan Frontier
- I spoke with my contact at Curt and the hitch part # 31241 that you referenced is a fit for your 2012 Nissan Frontier that is 4 wheel drive. This would work well on your 2012 Nissan Frontier that is 4 wheel drive.
view full answer... - Front Mount Trailer Hitch for 2015 Nissan Frontier for Lining Up Trailer
- Although stabilizers like you are asking about are not made, what a lot of people do is use a front-mounted hitch for things like this, so that's what I recommend for your 2015 Nissan Frontier, and the correct fit is the following:
- Curt Front Mount Trailer Hitch Receiver # 31241
view full answer... - How To Trim Air Dam On 2018 Nissan Frontier When Installing Curt Front Trailer Hitch Receiver
- There is not a template for trimming the air dam on your 2018 Nissan Frontier so you will want to look at the attached photo which shows how we trimmed the air dam. This way you can install it back onto your 2018 Nissan Frontier with the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31241 installed.
view full answer... - Fit and Compatibility of Front Hitch for 2016 Nissan Frontier
- Good news! Another one of our customer's tried out the Curt Front Hitch # 31241 which fits the 2015 Frontier and returned to tell us it was a good fit for his 2016 Nissan Frontier. I spoke to my representative at Curt and they said they haven't had a chance to confirm fitment because it hasn't been tested at their facility yet but is on there list of to dos.
I have linked the hitch to this page for your purchasing convenience.
view full answer... - Curt Front Mount Hitch Recommendation for a 2011 Nissan Frontier
- The only way the Curt Front Hitch part # 31241 that you referenced can be installed on a vehicle like your 2011 Nissan Frontier would be with it attaching to the bottom of your vehicle frame. The mounting flange wouldn't be wide enough to make it around the frame, and there are no weldnuts on top of the frame either.
view full answer... - Front Hitch Recommendation for a 2012 Nissan Frontier
- I have checked with my contacts at Curt, and their Front Mount hitch # 31241 is confirmed as a fit for the 2005 - 2013 Nissan Frontier. So it will fit both the 2010 and 2012 Nissan Frontier.
This front mount hitch is rated for up to 350 pound of a vertial load, and a line pull of up to 9,000 pounds. Please check front axle weight rating of your Nissan Frontier make sure that is not exceeded. Also for installation purposes, please note that the front center air dam must be permanently
view full answer... - Availability of Front Mounted Hitch for 2009 Toyota 4Runner
- We do indeed offer a front mounted receiver. The Curt Front Mount Receiver, part # 31367 would be a fit for your 2009 4Runner. I've linked you to a video showing the hitch being installed on a FJ Cruiser. The procedure on your 4Runner would be identical.
The Curt # 31241 hitch you referred to is a front mounted receiver for a Nissan Pathfinder or Frontier, and wouldn't fit your 4Runner.
view full answer... - Are there Front and Rear Mounted Trailer Hitches for a 2005 Nissan Pathfinder 4x4
- Rear mounted hitches are not available for the 2005 Nissan Pathfinder because it is supposed to have come with one from the factory. The best place to look for a replacement rear mount hitch for your vehicle would be through a dealership.
But for a front mount I can help you with that, no problem. We have the Curt front mount hitch # 31241 that you have referenced that will fit your Pathfinder.
This hitch is rated for 350 pounds vertical load. So anything you load on in the front
view full answer... - Recommended Snow Plow Set Up For A 2007 Chevy Silverado Classic 1500 LD
- There will be two options for adding a plow to the front of your 2007 Chevy Silverado Classic. Keep in mind that both of these options will be for the 1500 LD model of Silverado, but with that being said, let's get into it.
The First way to go about adding a plow will be using a front mount hitch, like the Curt # 31302. This allows the Detail K2 Elite Snowplow # K2AVAL8422ELT to attach to your truck without the need of custom brackets.
The other option is the Custom Mounting Brackets
view full answer... - Does Curt Front Mount Trailer Hitch Receiver # 31241 Require Cutting the Bumper on 2014 Frontier
- The front-mount trailer hitch receiver you referenced, Curt # 31241, is a fit for specific Nissan and Suzuki vehicles including your 2014 Frontier.
No drilling is required but the air dam (lower fascia) and tow hooks must be permanently removed for hitch installation. No cutting is needed either. You will need a torque wrench to secure the fasteners to the specified rating as indicated in the written instructions from Curt which are linked for you at right.
view full answer... - Is There a Front Hitch Available for a 2009 Nissan Frontier
- Yes. The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31241 is a confirmed fit on your 2009 Nissan Frontier and will give you a 2" receiver to carry a bike rack on the front of your truck.
I've linked an installation video of this hitch you can check out, as well as our entire selection of bike racks that will fit in a 2" hitch in case you don't have one already.
view full answer... - Parts Needed to Flat Tow a 2009 Nissan Titan
- For a base plate kit for your 2009 Nissan Titan we have the Roadmaster part # 341-1 as a confirmed fit. It will attach directly to Roadmaster tow bars but in case you have a different brand I attached a link to a page that has all of the adapters we carry as well.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This
view full answer... - How Much Ground Clearance Will there Be with Curt Front Hitch Installed on a 2005 Nissan Pathfinder
- Once installed the Curt front receiver # 31241 will be directly below the front fascia on your 2005 Nissan Pathfinder, see diagram. It will hand down from that point approximately 2-1/2 inches. So measure from the ground to the bottom of the front fascia and subtract 2-1/2 inches to get a good approximation of ground clearance.
view full answer... - Can a Front Mount Trailer Hitch and Westin Bull Bar be Installed Together on 2012 Nissan Frontier
- The Curt front mount receiver # 31241 and the bull bars available for your 2012 Nissan Frontier install on the bottom of the truck frame in the same location. You can have one installed at a time. The hitch attaches directly to the bottom of the frame and the bull bars have brackets that attach to the bottoms of the frame.
While it is possible that the bull bar brackets can be sandwiched between the frame and the hitch, or the hitch between the brackets and the frame, the products are
view full answer... - Front Hitch Recommendation for a 2016 Nissan Frontier
- Yes it will! We had a customer come back and tell us that the # 31241 did end up fitting his 2016 Nissan Frontier so it will also work for yours.
view full answer... - Recommended Front Mount Trailer Hitch for 2017 Nissan Frontier
- The Curt Front Mount Trailer Hitch Receiver # 31241 referenced in your question is indeed confirmed to fit your 2017 Nissan Frontier Crew Cab. It will provide a 2 inch receiver opening and a vertical load limit of 350 pounds. Keep in mind that the center air dam will need to be permanently removed for the installation.
I have attached the written installation instructions for you to look through.
view full answer... - Front-Mount Hitches for 2012 Nissan Frontier
- The two front-mount hitches we have for your 2012 Nissan Frontier, Draw-Tite # 65075 and Curt # 31241, both mount to the same points on the Frontier's frame and the bottom of the receiver tubes on both will be approximately 7-inches below the top of the mounting brackets. I measured both hitches in our warehouse to see if one offers more clearance than the other; they are virtually identical in this respect. Between the two I suggest the Draw-Tite since it has a higher vertical load rating
view full answer... - Will Curt 2 Inch Front Hitch # 31241 Fit a 2010 Nissan Frontier
- The Curt 2 Inch Front Hitch, part # 31241 will fit a 2010 Nissan Frontier. It is designed to fit the 2005 to 2011 Nissan Frontier. It does require that the center lower air dam and front tow hook(s) be permanently removed. I am including a link to the installation instructions on the Curt hitch.
view full answer...
Info for these parts were:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Shane H
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
8/23/2022
If you are having troubles with the mount being too narrow and the holes not lining up, it could be that the hitch has been flexed during shipment. This is common amongst hitches, since the mounting brackets are made from a mild steel that allows the hitch to flex with the vehicle after installation. If the entire hitch was made of rigid steel, there would be a greater chance of the hitch being damaged and experiencing stress cracks. Such cracks could cause the hitch to malfunction. This flexing often times will cause the holes not to align. Because of this we do have a help article I have the link attached below that will walk you through the process of straightening the hitch.
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx