Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 part number: Y00426
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Black powder coat finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 part number: Y06154
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 4 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006154 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06154
Average Customer Rating: 4.8 out of 5 stars (1471 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Frank02/10/2023
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.1515956
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!549914
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!1218031
Follow the instructions, and you can't go wrong on the self installation1757391
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need. I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak. 427427
product was just what I needed The folks at etrailer were extremely helpufl!!1697363
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: DogDoc04/12/2024
2024 Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.1765846
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install. 803293
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.1139343
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down. 589149
by: Daryl04/29/2020
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.789770
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.1238568
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.1678878
by: Roland01/08/2024
Well packaged and on time 1708575
by: Ryan09/07/2022
Quiet crossbars that look good and do not howl at highway speeds.1397047
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.462341
by: Eugene01/29/2021
2017 Chevrolet Tahoe
Fast delivery. Yakima roof system for my 2017 Tahoe was perfect.948571
I recommend going with the Yakima JetStream roof rack system for your 2019 Ford Expedition because the JetStream bars are more versatile than other crossbars and they don't require any modification to the rubber strip when using accessories.
The parts that you need to install this system on your 2019 Expedition are the 60" JetStream Bars # Y00426 , and the TimberLine Towers # Y33TR. These easily install on the OEM raised rails of your Expedition and can be locked for security with the view full answer...
Yes, it is definitely possible. For a 60" crossbar system on your flush rails on your 2017 Honda Pilot, you need the following parts:
- Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR
- Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 # Y00245
- Yakima Same-Key Lock Cores # Y07204
As far as fitment, there will be no issues with this system fitting view full answer...
For starters, the correct Yakima roof rack for your 2019 Jeep Grand Cherokee Altitude is the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, and part # Y06121. Unfortunately, we have not yet had a chance to install this system on a Grand Cherokee. However, we have had a chance to install this very same system minus the vehicle specific car clips on a similar vehicle, a 2017 Dodge Durango. If you take a look at this video you will get a very good ideal of how the kit installs view full answer...
The roof rack I recommend for your 2019 Honda Ridgeline is from Yakima because it will give your truck a roof rack that is not only very sturdy, but also quiet and will keep your Ridgeline looking great.
The correct parts for the roof rack will depend on if your '19 Ridgeline has a naked roof or factory installed rails that run front to back.
For a 2019 Honda Ridgeline with a naked roof the Yakima roof rack consists of:
- Yakima JetStream Crossbars # Y00426
- BaseLine Towers view full answer...
Absolutely! For just the Yakima BaseLine Towers for your 2020 Acura RDX you use part # Y28TR. Then for the Front BaseClip Fit Kit you will need part # Y06174 and for the rear you will use part # Y06154. For adding theft deterrence measures, I strongly recommend using the Yakima Same-Key Locks # Y07204. Pricing information will be listed on the product pages.
These will work great with your existing Yakima JetStream or CoreBar Crossbars to provide you with a complete roof rack for your view full answer...
I recommend going with the JetStream roof rack for your 2019 Hyundai Elantra because it gives you lightweight aluminum crossbars that feature rubber strips that you don't have to cut when mounting accessories.
This roof rack consists of the 60" JetStream bars # Y00426, along with the BaseLine Towers # Y28TR, and the BaseClip Fit Kits # Y06160 and # Y06167. To add locks to this system you can use the SKS Lock Core Kit # Y07204.
If you don't already have a roof mount bike rack then view full answer...
In order to haul a 17' long aluminum canoe and tow a trailer with your 2018 Chevrolet Silverado 2500HD, I have two options for you. The first option would be to place part of the canoe on the roof and the other part on a t-load carrier at the rear. For this, I recommend using the Yakima JetStream Crossbars System (Double/Crew Cab Only) which is composed of part # Y00426, part # Y28TR, and part # Y06122 with the Yakima KeelOver Rooftop Canoe Carrier part # Y04069. This will then allow you view full answer...
I recommend the Yakima JetStream Crossbars part # Y00426 with the BaseLine Towers for Yakima Crossbars part # Y28TR, fit kit part # Y06153 and part # Y06132 for the 2020 Toyota Highlander. The Yakima JetStream are aerodynamic bars to cut down on wind noise and have a t-track to mount accessories like a SUP board carrier.
I recommend the Lockrack Stand-Up Paddle Board Carrier part # LR54FR which has racheting arms so you don't need to worry about tie downs. The Lockrack mounts in the view full answer...
For your 2021 Kia Telluride with a naked roof the best roof rack option is the Yakima JetStream rack part numbers # Y00426, # Y28TR, # Y06125, and # Y06165.
This is the highest capacity roof rack that fits your vehicle, is the easiest to install, and has the quietest bar design.
You could then carry a cargo box like the Thule Motion XT part # TH629707 which is similar in color to your vehicle and is very easy to use and well made. view full answer...
For a Yakima crossbar system that includes the JetStream bars on your 2021 Kia Telluride with a naked roof, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06125
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06165
- (Optional for extra security to deter theft) Yakima view full answer...
The Yakima Roof Rack Kit for a 2020 Jeep Grand Cherokee that uses parts # Y00426, # Y28TR and # Y06121 is a great choice and I don't think you can ever go wrong with Yakima products; they're durable and easy to install. The Baseline Towers # Y28TR and landing pads # Y06121 will clamp onto your flush mounted rails easily, like the dealer mentioned. This rack has 60" Jetstream bars that are aerodynamic and will provide you with a ton of useable bar space, so it's just a great all around roof view full answer...
The Yakima roof rack you looked at, consisting of the JetStream # Y00426 60 inch crossbars, # Y28TR BaseLine Towers, # Y06102 and # Y06139 clip kits is compatible with your 2016 Ford Edge with the glass roof, according to Yakima. The feet will sit on the painted portion of the roof, not the glass. view full answer...
The good news is that Yakima sells rooftop tents, so their fit guide will always indicate whether their rooftop tents are compatible with their roof rack. This is a good indicator of whether other companies aftermarket roof racks will support the weight of a rooftop tent. Your 2017 Chevy Suburban can carry a rooftop tent.
Before rooftop tents we had to keep track of one weight limit. This weight limit is primarily based upon the strength of the vehicle's roof. That weight limit is the view full answer...
While we do not know the exact height of the raised rails of your 2021 Ford Bronco Sport Badlands, there is a way to gain a strong approximation of whether the Yakima JetStream Crossbars - Black - 60" Long # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR allow you to open the sunroof on your vehicle.
From the bottom of your roof to the bottom of the JetStream crossbars is about 4 inches tall. In order to determine if you have enough room, I recommend opening your view full answer...
For your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs.
Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs.
Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178. view full answer...
Yes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV
This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked view full answer...
If you have the Yakima Black Jetstream crossbars on your 2017 Forester, the longer crossbars that will work with your roof rack are part # Y00426 for 60 inch, and part # Y00427 for 70 inch.
If you have the Yakima CoreBar roof rack, replacement 60 inch crossbars are part # Y00422 and 70 inch are part # Y00423.
If your roof rack has round crossbars you can use part # Y8810025 for 66 inch and part # Y00411 for 78 inch.
You will need to check with your local authorities to see if view full answer...
The roof rack I recommend for you is the Yakima Roof Rack with JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, BaseClip Fit Kit # Y06137, and BaseClip Fit Kit # Y06127. I confirmed with my contact at Yakima that they do not have any fit restrictions for the glass panoramic sunroof on your 2015 Hyundai Sonata and so this roof rack will work well for you.
I have attached a photo showing where this rack mounts on the Sonata. view full answer...
We sure do!
For your 2022 Toyota Highlander I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars in Black # Y00426, Yakima Base Line Towers # Y28TR, BaseClip Fit Kit # Y06153, and BaseClip Fit Kit # Y06132. I do also recommend adding the Yakima Same Key System Lock Cores # Y07204 to the towers to keep them secured to the roof of your Highlander.
This system will give you 60" of useable crossbar space with a 165lb weight capacity which will be perfect for view full answer...
We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part # Y00425 for the two 50" JetStream Crossbars in Black, # Y28TR for the BaseLine Towers, # Y06159 for the Front BaseClip Fit Kit, and # Y06170 for the Rear BaseClip Fit Kit.
This is going to provide you with an extremely sleek rack that will be really quiet on the road due to the aerodynamic view full answer...
Due to the roof design of your 2018 Jeep Grand Cherokee the only roof rack solutions we have require clips that mount to the door frame. You'll have to use the Baseline feet part # Y00146, the BaseClip fit kit part # Y06121 (quantity of 2), and then the roundbar adapter part # Y03536 to reuse your crossbars like the # Y00408. view full answer...
Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta.
Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier. view full answer...
Yakima does have a JetStream roof rack confirmed as a fit for your 2019 Kia Sorento with a naked roof with the part numbers # Y00425, # Y28TR, # Y06159, # Y06170. The Jetstream bars are really nice as they are aero shaped and have a channel that runs down the top of it for roof accessories that have channel attachment options. view full answer...
Thanks for sending us a picture!
The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128. view full answer...
Yakima Baseline Towers # Y28TR comes with a total of 4 towers.
If you are looking for a complete crossbar system that includes the Yakima Baseline towers, I would be happy to assist you if you confirm your year/make/model of vehicle.
view full answer...
I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071.
If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130.
For flush mount rails you would instead need the 50" JetStream Bars # Y00425, view full answer...
Yakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime.
Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR.
You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars. view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
I do have a great roof rack solution for you, however the Whispbar Custom Fit Kit that you referenced is designed for certain model GM pickup trucks and won't work on your Ford Fiesta. There isn't a Whispbar system currently in production that will fit your vehicle.
For a similar high-quality roof rack that will work great on your 2011 Ford Fiesta I highly recommend the Yakima JetStream system that consists of # Y00425 for the two 50" JetStream Crossbars, # Y28TR for the BaseLine Towers, view full answer...
The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers.
In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit view full answer...
Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet.
If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've view full answer...
The Yakima Baseline towers # Y28TR with the landing pad 19 will leave you about 5-1/4 inches from the top of your bar to the roof of your 2020 Honda CR-V. That being said the Yakima Showdown # Y04081 will sit about 9 inches up from the top of your bar when the kayaks are not loaded. view full answer...
Since the rack he has is for raised rails and the crossbars are only 38" in length you wouldn't be able to use any of the components and would need a completely new rack. A 2002 Toyota 4Runner has a minimum bar length of 48" so for a round bar setup on a naked roof you would need the following components:
Yakima RoundBar Crossbars # Y00408
BaseLine Towers for Yakima Crossbars # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06171
If view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
The Thule Evolution 1600 cargo box that you referenced has been discontinued, but I spoke with my contact at Thule who was able to confirm some fits for me.
The Evolution 1600 is compatible with Yakima round bars so the system that you will want to use includes the 48" CrossBars # Y00408, BaseLine Towers # Y28TR, RoundBar SL Adapter # Y03536, and BaseClip Fit Kit # Y06102. This roof rack doesn't come with locks but they can easily be added with part # Y07204 .
If you already have view full answer...
I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier view full answer...
Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06154 is the same as the Yakima Baseclip 154. The clips will be compatible with the Yakima Baseline Towers # 800146. view full answer...
So we were able to determine that the 2023 Acura RDX wasn't changed from the 2022 model and we then carried over the fits from the previous year. Sometimes one of the rack manufacturers does this first and since we know they did the correct research we know that other brands will also carry over even if they haven't had a chance to test it like with the Yakima Corebar roof rack part numbers # Y00421 # Y64AR, and # Y49AR that we have listed for your 23' RDX. view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.