Hey Guy, the awning fabric of the etrailer replacement fabric kit for the 15 foot awnings part #e96QV is 14 foot 2 inches long. This will work as a replacement for other brands of awnings too as long as the dimensions are correct.
Hey Guy, yes you did read the install manual for the etrailer awning part #e22AV correctly and the overall width is 14 foot 2.95 inches. I attached the chart that has all of the dimensions of the awning for you to check out as well. How much room do…
Hey Kevin. Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is just the replacement fabric. It'll attach to your existing awning roller so long as you have a 20' powered awning. There is no stitching built into the fabric for…
Hey Leo, yes the etrailer replacement awning fabric part #e86QV does have ability to have a light strip integrated into it. Do you have an etrailer awning currently?
Hi Jonathan, The Atwood GC6AA-10E hot water heater was discontinued after Atwood was acquired by Dometic, so there is no direct replacement for your current water heater. If you prefer to stick with a water heater with a tank, I recommend using the…
Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…
The correct Solera RV Slide-Out Awning for a 2017 Keystone Cougar 28RKS can be found by measuring the slide-outs from the outside of each flange. If the flange to flange measurement for the larger slide is 149-1/2" then you'll need part…
Hello, sorry for any confusion. For determining the proper size Solera Slider your project requires you need to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the…
Hey Scott, that's a patio awning from Solera that we do not carry at this time unfortunately but the 14 inch Solera part #SO67ZR you referenced would work great.
Welcome back Bryan! The 84" Wide etrailer RV Slide-Out Topper item #e49QV will indeed work without Solera brackets. We've got an adapter that can be purchased separately that attaches our toppers to Solera brackets. The 84" Wide…
You do need 6 inches of clearance from the edges of your slide box in order to fit a Solera awning. To determine the correct slide-out awing you simply need to measure from flange to flange and the fabric will need to extend at least 2-1/2 inches…
Hey Carl, thanks for the dimensions of your two slide outs! Based on that the correct slide toppers part #e37QV and #e69QV are correct for you. I actually just came from a training where we were checking out these slide toppers and they're really…
