View Cart

Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!

Eric

Cedar Springs, MI

Hard Folding Tonneau Covers
Hard Roll Up Tonneau Covers

Tonneau Cover Toolbox


BAK Industries





BAK Industries Reviews and Installation Videos


See all BAK Industries videos >>

Expert Answers about BAK Industries

  • Recommended Tonneau Cover for 5th Wheel Towing with a 2019 Ford F-350
  • We actually have quite a few selections for tonneau covers that secure gear in your truck bed when the tailgate is shut and locked. When it comes to the best though there are only 2 options that I recommend taking a look at for your 2019 Ford F-350. The first is the BAK Revolver. This is a roll up tonneau cover that actually features an aluminum construction which is more heavy duty than the typical soft roll up covers. The Revolver provides security to your truck bed via the locking...
    view full answer...

  • Can 5th Wheel Trailer be Towed with BAKFlip Tonneau Cover Folded Flat on 2018 Ford F-350
  • The problem that you would run into with a folding cover such as # BAK72331 is if you leave it on but folded up flat it will be several inches above the truck bed sides. This means that when making tight turns the trailer's pin box could make contact with the cover. The pin box will likely be fine but if that happens it will damage the cover and possibly your 2018 Ford F-350. For this cover the best thing would be to remove it from its installed position and, if there is space, lay it down...
    view full answer...

  • Recommended Tonneau Cover for a 2017 Honda Ridgeline that Retains All Factory Truck Bed Features
  • The BAK Revolver X2 Hard Tonneau Cover part # BAK39602 is a confirmed fit for your 2017 Honda Ridgeline. The durable aluminum slats located underneath the cover makes this cover a favorite among customers. In regards to fitment on your Ridgeline, the BAK Revolver X2 will not interfere with the dual action tailgate but will limit the access to the trunk in your truck bed to about 75% while the cover is both closed/open. This interference is due to the location of the rails for the tonneau...
    view full answer...

  • Does BAKFlip MX4 Hard Tonneau Cover BAK48602 have a Seal at the Cab Side for a 2018 Honda Ridgeline
  • The front (cab side) of the BAKFlip MX4 Hard Tonneau Cover # BAK48602 for your 2018 Honda Ridgeline has a seal that, when the cover is properly installed, will keep out water. You could add additional material such as # PARTS-326A0004 but doing so may not allow the cover to close at the front properly.
    view full answer...

  • Does BAKFlip MX4 Tonneau Cover for 2019 Honda Ridgeline Come With a Lock
  • The BAKFlip MX4 Hard Tonneau Cover # BAK48602 does not come with a separate lock with a key but it still offers security for your 2019 Honda Ridgeline. The reason for this is when the panels are down they are latched into place on the inside so as long as your tailgate is locked your '19 Ridgeline will have a completely secure bed. If your '19 Ridgeline does not have a lock I strongly recommend adding the Pop & Lock Custom Tailgate Lock # PAL8600. I have added a link to a video of this...
    view full answer...

  • Recommended Tonneau Cover For 2016 Nissan Titan XD Truck With 6-1/2 Ft Bed And Utili-Track System
  • We have several Tonneau covers that will work with your 2016 Titan XD. If you are looking for a hard, folding cover I recommend the BAKFlip FiberMax Hard Tonneau Cover, part # BAK126524. This tough cover is constructed of 1/2 inch thick panels that resists harmful UV rays. No drilling is needed for installation. If you are interested in a soft, roll-up cover I recommend the Access Vanish Soft, Roll-Up Tonneau Cover, part # A93219. There is no drilling needed to install this cover...
    view full answer...

  • Comparing the BAK Revolver X2 and X4 Tonneau Covers for a 2019 Honda Ridgeline
  • The only difference between the BAK Revolver X2 # BAK39602 and the X4 # BAK79602 that fits your 2019 Honda Ridgeline is that the X4 has a matte black finish. Aside from the X4 having more of a rugged look there are no other differences between these covers so it really just boils down to what kind of look you want on your pickup.
    view full answer...

  • Will BakFlip Folding Tonneau Cover Fit 2017 Ram 2500 Short Bed and Allow Access to 5th Wheel Tow
  • I attached a picture that shows the Bakflip G2 part # BAK26203 installed on a very similar 2017 Ram 3500 short bed and you can see that with the last panel folded down the fifth wheel hitch head is accessible. This means you'd also have access to the Andersen Ultimate adapter as well.
    view full answer...

  • Will The TracRac SR and the Revolver X2 Work Together On My 2017 GMC Sierra
  • The BAK Revolver X2 Hard Tonneau Cover part # BAK39120 and the TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 are both a confirmed fit for your 2017 GMC Sierra, if you have a 5-1/2' bed. For a 6-1/2' bed, you will want part # BAK39121 and part # TH43002XT-781. In addition to both being compatible with your truck, they will also both work with one another as the TracRac SR mounts to the top of the trucks bed rails and the Revolver X2 mounts just inside the bed rail lip. Therefore,...
    view full answer...

  • Recommended Tonneau Cover to Prevent Leaks on 2018 Chevy Colorado
  • The correct BAKFLip MX4 Hard Folding Tonneau Cover for your 2018 Chevy Colorado is the part # BAK48126 if you have the 5 foot bed or # BAK48125 if you have the 6 foot bed. The BAKFlip MX4 # BAK48120 that you referenced is designed to fit certain model years of the Sierra and Silverado. This particular tonneau cover will do a great job of keeping water from inside the bed. It features black rubber seals and a built-in drainage system that is designed specifically for this purpose. We...
    view full answer...

  • Recommended Ladder Rack and Tonneau Cover for a 2017 Ram 1500 with the 5-1/2 Bed
  • I do have a ladder rack and tonneau cover combination for your 2017 Ram 1500 with the 5-1/2' bed but none of them include the RetraxONE MX Hard Tonneau Cover part # RT60230. This cover mounts on top of the bed rails which is the same space needed to mount a ladder rack hence why it is not compatible with any of the options we offer. In order to use a tonneau cover with a ladder rack you would need to find one that mounts inside the bed rails. I recommend using the BAKFlip G2 Hard Tonneau...
    view full answer...

  • Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  • I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
    view full answer...

  • Replacement Seal Kit Recommendation for Bakflip G2 Tonneau Cover
  • The correct rubber seal kit you'd need for the BAKFlip G2 tonneau cover would be the part number # PARTS-326A0010.
    view full answer...

  • Hard Folding Tonneau Cover that Can Stay Closed when Closing Tailgate on 2017 Honda Ridgeline
  • With the BAKFlip Tonneau cover # BAK72602 for your 2917 Honda Ridgeline you do need to have the rear most panel open before closing the tailgate or it could damage the cover. But there is a cover that will allow you to close the tailgate with the cover up or down. For your Ridgeline it is the BAKFlip MX4, # BAK48602. The design of the MX4 will allow you to close the tailgate whether the cover is up or down in the closed position. The biggest differences between the MX4 and the F1 is...
    view full answer...

  • Recommended Hard Tonneau Cover For 2013 Ram Pickup With Short Bed
  • Since Tonneau covers are designed to fit specific bed sizes it is best to go with a cover that is a confirmed fit for your truck year make and model. If you have a 5-1/2 ft bed on your 2013 Ram I recommend the BAKFlip G2, part # BAK26207. This cover fits inside the bed rails of your truck and has a very low profile. This is a tri-fold aluminum cover, and requires no drilling for installation. If you have a 6-ft bed the Tonneau cover I recommend is again the BAKFlip G2. For the 6-ft...
    view full answer...

  • Bike Carrier Options for 2018 Ford F-150 with Tonneau Cover
  • There are a few combinations of tonneau cover and ladder rack for trucks like your 2018 F-150 that will work together. The key is that the two products cannot use the same mounting points. As an example, the 5-1/2-foot bed F-150 without the cargo management system can use the BAK Revolver X2 tonneau cover # BAK39329 that rolls up. With this cover installed it is possible to also use the TracRac SR Siding ladder rack # TH43002XT-508 that also fits that 5-1/2-foot bed truck. Unfortunately,...
    view full answer...

  • Recommended Quad Panel Hard Cover Tonneau Cover for 2011 Dodge Ram
  • For you 2011 Dodge Ram, I have a recommendation for your 4 panel hard cover tonneau. If you have a 6-1/2 foot bed, I recommend the BAKFlip MX4 Hard Tonneau Cover # BAK48203. If you have an 8 foot bed, then you will want # BAK48204. This Tonneau has a quad-fold design and allows for partial or full bed access. It has automatically latching panels to give you a locked bed when your tailgate is closed and locked. The cover has aircraft-grade aluminum rails and a black powder coat finish....
    view full answer...

  • Bulkhead Seal Recommendation for BAKFlip MX4 Tonneau
  • We have two bulkhead seals for the BAKFlip tonneau covers. We have the part # PARTS-326A0004 which is 3/8" Thick x 65" Long and we also have the part # PARTS-326A0005 which is 1/4 inch thick and 65 inches long. Since I don't know which specific part number cover you have you are going to have to measure your current one and determine which is the correct size.
    view full answer...

  • Recommended Tonneau Cover To Work With TracRac SR Sliding Truck Bed Ladder Rack
  • The Tonneau cover that is in the customer's pictures (see attached) is the BAKFlip F1 Hard Tonneau Cover # BAK72122. However in that same review, the customer says that the cover and the rack rub against each other. That rubbing will likely cause damage overtime. According to Bak, the only Tonneau that we know works with the Tracrac SR is the # BAK39122 or # BAK79122 because it sits further inside the bed rails than other covers do and they don't rub against one another. The big difference...
    view full answer...

  • Tonneau Cover Recommendation for 2018 GMC Sierra 1500 6-1/2 foot Bed
  • There's only one style of tonneau cover we can recommend that fits with the TracRac sliding ladder racks like the part # TH43002XT-781 that you have installed on your 2018 GMC Sierra 1500 6-1/2 foot bed. That's the BAK Revolver tonneaus like the X4 part # BAK79121 that is a confirmed fit for your truck as well. It's the only tonneau that will roll up and not interfere with the uprights of the TracRack sliding ladder rack so it's the way to go.
    view full answer...

  • Replacement Seal for BAKFlip Tonneau Cover on 2012 Chevy Silverado
  • There is a seal for your 2012 Chevy Silverado, the Replacement Bulkhead Seal for BAKFlip Truck Bed Tonneau Covers # PARTS-326A0004 which is 3/8" thick x 65" long as well as the Replacement Bulkhead Seal for BAKFlip Truck Bed Tonneau Covers # PARTS-326A0005 which is 1/4" thick x 65" long. The tailgate seals are universal and our most popular is the Access TrailSeal Tailgate Gasket- A Tight Tailgate Seal # 834532001583. I've added a link to an installation of this seal for you to take...
    view full answer...

  • Best Tonneau Cover for a 2019 Ford F-350 with B&W Companion OEM 5th-Wheel Hitch
  • The bedsides on your 2019 Ford F-350 are very tall so you should not have any clearance issues with most tonneau covers while using the B&W Companion OEM 5th-Wheel Hitch part # BWRVK3300. The B&W Companion also has an adjustable head so you could always lower it if needed but that should not be a problem on your F-350. Ford is notorious for having tall bedsides which is good in this case. For a tonneau cover, I highly recommend the BAK Revolver X4 Hard Tonneau Cover part # BAK79331 which...
    view full answer...

  • TracRac SR Needed to for 2017 Toyota Tundra with 6-1/2 foot Bed and BAK Revolver X2 Cover Installed
  • Whether your 2017 Toyota Tundra has the 6-1/2 foot bed with the Deck Rail System, with the Revolver X2 # BAK39410T, or without the Deck Rail System, with the Revolver X2 # BAK39410, we do have a solution for you. The TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-610 is confirmed to fit either rail system and is the only ladder rack that we have been able to confirm will work with the Revolver X2. This tonneau cover/ladder rack combination is actually my favorite to recommend...
    view full answer...

  • Does BAKBox 2 Collapsible Toolbox Fit BAK Revolver X4 Tonneau
  • Since the only difference between a Bak Revolver X2 and an X4 is the finish of the paint the BAKBox 2 Collapsible Truck Bed Toolbox # BAK92120 will work with a X4 like the part # BAK79122 that you referenced. This is a matte finish cover whereas the X2 is gloss.
    view full answer...

  • Recommended Tonneau Cover for a 2016 Nissan Frontier King Cab with Factory Bed Extender
  • I have two different types of tonneau covers that will fit your 2016 Nissan Frontier, a hard folding tonneau cover and a soft roll up tonneau cover. A hard folding tonneau cover will be more durable and can be locked but will be less cost effective. A soft fold tonneau cover will be easier to use and more cost effective but won't provide as much security or last as long. For a hard fold tonneau cover, I recommend the BAKFlip G2 Hard Tonneau Cover part # BAK26507 because it has a sleek...
    view full answer...

  • Recommended Tonneau Cover with Hanging Box and Headache Rack for 2017 Ford F-150 XLT 5.5 Foot Bed
  • For a headache rack, I recommend the MaxxTow MaxxHaul Headache Rack - Aluminum # MT70456 for a very basic application that mounts into the stake pockets of your truck that will allow many tonneau covers to function correctly. This installation does require an extra hole be drilled into the bed rail. The Extang EnCore Hard Tonneau Cover # EX62475 you referenced will not allow the headache rack because it does not offer enough bed rail space. For a similar cover that will allow the stake...
    view full answer...

  • Tonneau Cover Recommendation for TracRac SR Ladder Rack Installed on 2016 Ford F-150
  • There's really only one tonneau cover we can recommend for a truck like your 2016 Ford F-150 that will work without interference with a TracRac SR ladder rack # TH43002XT-508 and that's the BAK Revolver X2 part # BAK39329. We can't guarantee a MX4 would work well with the SR ladder rack.
    view full answer...

  • Comparing OEM Tonneau Cover REV for 2017 Chevy Silverado Crew Cab Short Box to BAK Revolver X2
  • I did some research and reached out to my contact at BAK to get some information. They confirmed the REV brand is a private label of basically the same products in the BAK tonneau cover line of products. They have both a GM and a Ford line that is private labeled so the vehicle manufacturer can have their OEM option. For your 2017 Chevy Silverado 1500 Crew Cab with the 5' 8" bed, the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl # BAK39120 is the correct fit and...
    view full answer...

  • Replacement Mounting Brackets for BAKFlip G2 Tonneau On 2014 Chevy Silverado 1500 5-1/2 ft Bed
  • We have the hardware kit you are looking for as # BAKBK200 which is the correct brackets and clamps for the BAKFlip G2 part # BAK26120 that you have on your 2014 Chevy Silverado 1500 with a 5-1/2 ft bed.
    view full answer...

  • Tonneau Cover and Ladder Rack Recommendation for 2014 GMC Sierra 1500 Short Bed
  • For your 2014 GMC Sierra 1500 there's only one tonneau cover we can recommend that allows you to also be able to install a sliding Thule ladder rack. For that you'd need the part # BAK39120 which is a roll up style cover that fits well between the base rails and uprights of the Thule ladder rack. Other covers like your folding cover may have interference as you try to fold them up with either the uprights or the base rails. For a sliding ladder rack that fits your truck you'd then want...
    view full answer...