2022 Keystone Avalanche Fifth Wheel RV Jack Pads

Since the Lippert Hydrauluic Landing Gear Feet are 12 inch in diameter and round the correct Snappads would be the part #SP74FR4.

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

Personally I prefer the SnapPad XTRA Jack Pads #SP54FR4 over the Stromberg Carlson #SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a 9" round landing pad.

Based on the information I could find you are going to need the SnapPad EQ Compact Jack Pads #SP24FR4. I have included an image you can use to verify your feet do look the same to fit these pads.

Hey Ronald, you actually don't need to use two sets of the Caliber Vehicle Ramps part #CA24AJ. You could just put them under the outside tires and they would work great. They have more than enough capacity at 20k since most your van would weigh…

Hey John, the #SN39FR is specifically designed for for 5-1/2 inch BAL Power C jacks and is a set of 4, so that's what I'd recommend using plus two more of the part #SN67FR which is these pads individually for a set of 6. How do you like the…

Hey Frank, We would need to know the diameter and shape of the footplate for your tongue jack in order to find the correct SnapPad to fit it.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

I have good news! I was able to reach out to my contacts at SnapPad and they tell me that the SnapPads #SP84FR4 you were looking at will fit on the 10-1/4" round concave feet of your 2018 Winnebago motorhome. The springs won't come into play…

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SS35ZR will mount on the top of your leaf springs on the rear of your 2021 Nexus Rebel. I have included pictures of the assemblies and a parts breakdown so you can see what order the…

Hey Harvey! Definitely a valid question - I'd hate to invest in something and run the risk of something happening to it. The Portable Power Watchdog Surge Protector #HU42VR has a loop at the bottom of the door that covers the connection so you…

Hey Tim, thanks for reaching out. Generally, with long bed trucks like your Ram 3500, turning clearance will not be an issue, so the offset ball would not be needed. If you want to be 100% sure, you can use the following formula to determine your…