Vehicle Style: 3.6L V6 Engine
Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This turndown exhaust system is specially designed for installation on vehicles with highly modified suspension systems. It has technologically advanced, mandrel-bent tubing and a straight-through muffler to improve engine performance and durability.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
Cat-back exhaust system has technologically advanced, mandrel-bent tubing and a performance muffler, both of which allow exhaust to flow freely. This improves engine performance, boosting horsepower and torque. High-clearance design for off-roading.
Tech Tip:
Exhaust will not fit on models with plastic rear fascia. Rear fascia would have to be replace with an aftermarket metal fascia.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This black axle-back exhaust has technologically advanced, mandrel-bent tubing and a black performance muffler, which allow exhaust to flow freely through the system. This boosts horsepower and torque, improving engine performance and durability.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This cat-back exhaust system has technologically advanced, mandrel-bent tubing and a round front muffler, which allow exhaust to flow freely through the system, boosting horsepower and torque and thereby improving engine performance and durability.
Tech Tip:
Exhaust system does not fit models with rear plastic fascia.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Videos
for Exhaust Systems
Help Articles
for Exhaust Systems
Expert Answers
for Exhaust Systems
Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wires…
view full answer...Hello Phillip, thanks for reaching out. Yes, the Reese Dual Cam #RP26002 WD system can be used with a Reese Friction Sway Control #83660. As long as the head of your WD hitch has the pre-welded tab for the sway control ball (pictured below), the…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The inner diameter of the expanded ends of the part #CAM44812 is 1.53 inches and the outer diameter of the non expanded end is 1.51 inches. So basically this setup is designed to either slip into a 1-1/2 inch pipe or slip over a 1-1/2 inch pipe.
view full answer...I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...The only open eye 1-3/4" wide leaf springs we currently carry is the etrailer #e24SR & #e33SR. I have no way to verify the weight capacity for your current springs but as it is only a 2" square axle this spring is likely much heavier…
view full answer...If you already have the B&W Gooseneck Hitch #BWGNRK1111 on your 2015 Ford F-250 then you will need to get a different hitch as that one is not compatible with a 2017 F-250. For your 2017 Ford F-250 you will need to use B&W Gooseneck Hitch…
view full answer...Hello Howlands, Unfortunately, we do not have dump trailer tarp kits. We do have some nets and tarps but nothing in the specs that you are looking for, closest thing we have is the Gladiator Trailer Cargo Net with Cam Buckle Tie-Downs - 7'…
view full answer...Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…
view full answer...Hey Mike, I believe you are asking about the height of just the blue spring of the part ##SS68DR SSR-623-40 which is 4 inches. Otherwise it sounds like you are asking about the distance from the top of the mounting bracket to the bottom of the spring…
view full answer...The MagnaFlow Black DPF Series Filter-Back Exhaust System #MF17068 won't give you any dash errors or inspection issues. Since the DPF system is intact you'd be totally legal and safe...but also much louder.
view full answer...Filter Products (8)