It sure is Nathan! The Curt Helux 5th Wheel to Gooseneck Shock-Absorbing Pin Box Adapter item #C54HB is the Curt/Lippert pn 2024044574. The Curt Helux item #C54HB is designed to replace a Lippert Rhino pin box. It has a 20,000 lbs towing capacity and…
Hey Howard, great question but yes the Blue Ox Towed Vehicle Battery Charge Line Wiring Harness #BLU44ER that you referenced does have a diode built into it so that it doesn't backfeed or reverse charge from the towed vehicle to the tow vehicle.…
Hey Kevin, thanks for reaching out. Yes, the Curt Helux 5th Wheel to Gooseneck Shock-Absorbing Pin Box will indeed be a direct bolt on replacement for your current Helux pin box. Right now, the Curt helix only supports the Lippert Rhino pin box bolt…
Hey Hewitt! It looks like the two ARB Base Racks designed for your 2020 Toyota 4Runner are the 72" Long x 51" Wide #ARB37YR and 61" Long x 51" Wide #ARB95GR. The ROAM 95L Rugged Case fits anything that has 80/20 channels. The…
Hello Kayla, I am so glad you wrote in to us! I was able to confirm with MCD Innovations that you will need the MCD Innovations RV Shade Repair Kit - Solo with Steel Brackets - Switch Controlled Motor #MC82YR to replace your current motor…
We've checked with LaSalle Bristol in the past and they do not offer just the replacement cables for their valves so you'd need to go with an all new valve with part #34466N4AB72GMA.
Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…
Not at all, Kate! The Rich Solar RV Solar Charging Kit w/ 2 Panels - 12V - 400 Watts #RS97VR is ideal for bus life. It’s a great match for a 200Ah lithium setup, with headroom for adding an inverter or third battery later if you decide to do so. The…
I need two things to help you pick out the correct leaf springs for your trailer. I need to know the axle capacity of your trailer as well as the length from eye to eye without a load on your trailer. With those two pieces of info I can help you pick…
Hey Derek, great question and thanks for stopping by! So mainly between the yellow #SSR-127-54 and the black #SSR-127-47 SumoSpring Solo's is the capacity. The yellow's are going to be for a heavier load application with a 2,800 lb capacity,…
If you have a 3,500 lb AL-KO axle and the brakes are indeed 10 inches, you can use Trailer Hub and Drum Assembly, #AKHD-545-35-K for a standard spindle and #AKHD-545-35-EZ-K for an E-Z lube spindle. For brakes you can use etrailer.com Trailer Brake…
Bright red tow hooks stand out so they're easy to spot when lining up a pull or guiding a strap. The color adds visibility and a clean, purpose-built look that matches trail gear. For a sure fit, confirm your bumper or frame mounting pattern and hole spacing, since dimensions can vary between hooks.
If the holes match the listed spacing, such as 2-1/8 inches between mounting holes, it should line up. If the spacing differs, it won't fit that pattern. Re-check measurements before installing.
Yes. At least one red recovery point lists 2-1/8 inches between the mounting holes. Match that center-to-center distance on your mounting surface to confirm fit. If your holes are set to a different spacing, it won't bolt up.
Measure the center-to-center distance between your mounting holes and compare to the listed spec. For options that note 2-1/8 inches between holes, your mount needs the same spacing. If your measurement is off, pick a tow hook with spacing that matches.
It is available. Some red recovery points specify 2-1/8 inches between mounting holes. Verify your vehicle's mounting layout and use the listed spacing to make the match.
Filters
