Set up faster and get it right the first time. 3 way levels are simple and very accurate, easy to see from the driver's seat so you can fine-tune side-to-side and then front-to-back. Pair with wheel chocks and levelers on a travel trailer and you're dialed in without the guesswork.
Yes, they can be easy to see from the driver's seat for leveling. Position the level so the display faces you while you creep into place. If yours uses LED indicators, watch the lights as you make small adjustments.
On battery-powered models with a red light, slow flashing is pretty close to level, faster flashing means further from level, and solid red is pretty bad. Check what your red light is doing while you adjust. Make small moves and recheck until the indicator settles.
3 Way Levels are simple, very easy to use, and accurate, which makes setup fast. Use them with wheel chock and levelers to get the trailer level side to side, then fine-tune front to back. Keep the display where you can see it during adjustments.
Yes, some battery-powered units can be recalibrated. Place it on a flat surface, power it on, then hold the power button about 10 seconds until lights go out. Rotate the unit 180° in the same spot, press power for 1 second, let the lights cycle, then resume normal use.
Some 3 Way Levels run on a single AA battery, use an LED display, and stick on with adhesive. They can shut down automatically after about 60 seconds of being motionless. Verify your model's battery type and mounting method before installation.
Filters
