1. Home
2. Trailer Parts
3. Trailer Door Latch
4. Spring Latchx

Hi Jeff; I'm sorry to say that the Bauer Products Manger Door Lock for Horse Trailers #BA83FR does not have a keyed alike option. Each latch will be keyed unique. We do not have a product that matches and comes keyed alike either so individual…

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x 1-1/2" Deep…

Hey David, I am not totally sure which two springs you are comparing but just because a dual spring torsion ramp door spring like the part #ERS160D96 has two springs doesn't always mean it has more capacity than a single spring. The springs can…

I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so some small…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide x…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Bob, The B&W Digital Tongue Weight Scale #BW34KR still isn't out yet so we don't currently have that information. I reached out to B&W and they stated they don't have any info to release yet but that it should be on the market…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

Hey David, The Replacement Cap Wrench for TST SE2 Cap Sensors #TST89FR works with 1/2" nuts that come with the TST brand TPMS which is around that 12mm/13mm size.

I might have an option for you but we don't offer any flush door latches with an extended striker. However, the Full Size Locking Steel Flush Door Latch part #L3980 matches your door cutout at 4-5/8" long x 3-3/8" so this is our best…

If you want an entire replacement latch assembly you could use the #305736 you were looking at. I can't quite tell from the picture but it looks like that is the old pipe and what you really need is a handle to attach. The #158-100 could be…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Hi Jeff; I'm sorry to say that the Bauer Products Manger Door Lock for Horse Trailers #BA83FR does not have a keyed alike option. Each latch will be keyed unique. We do not have a product that matches and comes keyed alike either so individual…

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x 1-1/2" Deep…

Hey David, I am not totally sure which two springs you are comparing but just because a dual spring torsion ramp door spring like the part #ERS160D96 has two springs doesn't always mean it has more capacity than a single spring. The springs can…

I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so some small…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide x…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Bob, The B&W Digital Tongue Weight Scale #BW34KR still isn't out yet so we don't currently have that information. I reached out to B&W and they stated they don't have any info to release yet but that it should be on the market…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

Hey David, The Replacement Cap Wrench for TST SE2 Cap Sensors #TST89FR works with 1/2" nuts that come with the TST brand TPMS which is around that 12mm/13mm size.

I might have an option for you but we don't offer any flush door latches with an extended striker. However, the Full Size Locking Steel Flush Door Latch part #L3980 matches your door cutout at 4-5/8" long x 3-3/8" so this is our best…

If you want an entire replacement latch assembly you could use the #305736 you were looking at. I can't quite tell from the picture but it looks like that is the old pipe and what you really need is a handle to attach. The #158-100 could be…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…