Built for everyday jobs, Detail K2 trailers are compact and versatile for everything from lumber runs to dump trips. Assembly is straightforward, though flipping or moving heavier sections is easier with two people, and dialing back tire pressure helps smooth a bouncy suspension on lighter loads. Tire speed rating is 65 mph; higher-speed tires can reach 81 mph but reduce capacity to 1,980 lbs and lower ride height about 3/4 inch.
Check gate latches for full engagement; add secondary straps if a latch won't seat. Gaps at gates and sides can leak sand or gravel—use a liner or tarp if hauling fines. If tilting the bed, verify license plate bracket height to help prevent plate contact with the ground. Some tie-down points sit low; reroute straps to reduce friction.
Yes, a chock can be bolted to the deck. Use a steel backing plate under the deck to spread the load; up to 1/8 inch thick was recommended for extra support. Use quality motorcycle tie-downs and secure to solid anchor points to keep the bike stable.
Measure your hitch height and the Detail K2 coupler height on level ground, then choose a rise or drop ball mount to make them level. Use the correct size hitch ball for the coupler. Once wiring is set, a properly matched ball mount and ball are the main pieces you need to tow.
Top speed is limited by the tires, often around 65 mph. Check the tire sidewall for the exact rating on your Detail K2. Higher-speed tires can be used, but confirm how the change affects trailer capacity and ride height. If the trailer feels bouncy at speed with a light load, lower tire pressure within the tire's spec.
Yes, if the bed dimensions fit your trikes. Measure the Detail K2 bed length and width and compare to the trike wheelbase and handlebar width. Loading one forward and one backward can help them fit side-by-side. Plan secure tie-down points before you haul.
Filters
