Smooth out your trailer with parts that cut noise and harsh bumps. For leaf springs, measure center-to-center of the eyes and confirm your axle rating; since springs flatten over time, pick replacements just a bit shorter. Upgraded equalizers with rubber and wet-bolt kits can quiet squeaks, add travel, and may change ride height and fender clearance, so verify space before you swap.
Heavier or higher leaf-count springs can help support added weight and improve fender well clearance. Confirm axle capacity and spring length first. If the spring's center bolt location differs from your old setup, you may need to modify U-bolt mounting plates to keep the axle centered in the fender well.
An over-under axle setup pairs well with replacing bushings and shackles. When changing suspension types or prepping for rough roads, check if the frame needs reinforcement or trimming and whether a cross tube between mounts is recommended. Verify all clearances and mounting points before drilling or welding.
Measure your leaf springs center-to-center of the spring eyes and confirm your axle's weight rating. Springs flatten over time, so choose ones that are slightly shorter than what you remove. For equalizers, measure eye-to-eye and the height between hanger and equalizer bolts, and match to your trailer's wheelbase.
Work safely with the trailer securely raised; two or more jacks help. Replace related hardware, torque everything to spec, and lube wet bolts. Take a short test drive, then do a visual check and re-torque. Upgraded equalizers and wet-bolt kits can reduce squeaks and creaks for a smoother, quieter ride.
It can. Taller equalizers can increase fender clearance and affect overall height. Compare the height between your current hanger and equalizer bolts to the new parts, and verify fender and building clearance. After installation, take a short drive, then recheck clearances and hardware torque.
Filters
Trailer Suspension Parts Parts or Accessories
