1. Home
2. Trailer Parts
3. Snow Plow
4. Snow Plow Parts

Hi Benito, Even though it's super close that 3/4" difference can cause issues since the spring seats must line up with the hangers welded to the frame rails. We do offer the Trailer Axle Beam with Easy Grease Spindles #e88GR which has a 7k…

If you are just wanting to get new brake assemblies you could use part #AKEBRK-7-SA for 12 x 2 assemblies for electric brakes or part #AKUBRK-7 for hydraulic brakes. These measure 12 x 2 inches so they will fit in the hubs you have now, plus they are…

To install the Detail K2 Storm II Snowplow - 84" #K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part #K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.

I spoke with the manufacturer, MORryde, about the dimensions of the MORryde Refrigerator Tray #MR59RR and their tech stated the distance from the ground to the bottom of the tray is 1.61". I can't exactly tell from your photos what your lip…

In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.

Thanks for reaching out, Richard! Out of the linked selection we have a handful of white wheel styles to choose from, but the most popular/common are the Steel Mini Mod #AM20785 and the Steel Spoke #AM20750 so if you're looking to match what you…

The difference between the two part numbers #AM20785 and #AM20793 is the weight capacity which is due to the fact the #AM20793 has a .5 inch offset which slightly lowers the capacity to 3,530 lbs instead of 3,960 lbs like what the #AM20785. I…

The only difference between the Dexstar Steel Mini Mod Trailer Wheel part #AM20789 and part #AM20785 is that the latter has a red and blue pin stripe around the outside of the wheel face and the former is just blank. That is the only difference, all…

Hey Kendall, yes when the Draw Tite hitch part #76184 is installed on your 2022 Buick Enclave you will be able to reinstall the bumper cover that you mentioned.

For the 3.3 liter engine of your 2009 Hyundai Santa Fe you would need the frost plug style heater part #KH11479 which installs in the very center of the back of the motor as you face it under the hood.

I checked with my source at Kat/5-Star and they confirmed that the Kat Heaters Custom Fit Cartridge Engine Block Heater #KH11812 is going to plug into the "FL"(front left) port on the engine block diagram I have attached to this question.…

The correct heater that is designed to fit your 2015 Hyundai Santa Fe with a 3.3L V6 is the Kat's Heaters Custom Engine Block Heater - Frost Plug Style #KH11479. For the frost plug location on your engine block, it is located on the right center…

Hi Benito, Even though it's super close that 3/4" difference can cause issues since the spring seats must line up with the hangers welded to the frame rails. We do offer the Trailer Axle Beam with Easy Grease Spindles #e88GR which has a 7k…

If you are just wanting to get new brake assemblies you could use part #AKEBRK-7-SA for 12 x 2 assemblies for electric brakes or part #AKUBRK-7 for hydraulic brakes. These measure 12 x 2 inches so they will fit in the hubs you have now, plus they are…

To install the Detail K2 Storm II Snowplow - 84" #K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part #K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.

I spoke with the manufacturer, MORryde, about the dimensions of the MORryde Refrigerator Tray #MR59RR and their tech stated the distance from the ground to the bottom of the tray is 1.61". I can't exactly tell from your photos what your lip…

In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.

Thanks for reaching out, Richard! Out of the linked selection we have a handful of white wheel styles to choose from, but the most popular/common are the Steel Mini Mod #AM20785 and the Steel Spoke #AM20750 so if you're looking to match what you…

The difference between the two part numbers #AM20785 and #AM20793 is the weight capacity which is due to the fact the #AM20793 has a .5 inch offset which slightly lowers the capacity to 3,530 lbs instead of 3,960 lbs like what the #AM20785. I…

The only difference between the Dexstar Steel Mini Mod Trailer Wheel part #AM20789 and part #AM20785 is that the latter has a red and blue pin stripe around the outside of the wheel face and the former is just blank. That is the only difference, all…

Hey Kendall, yes when the Draw Tite hitch part #76184 is installed on your 2022 Buick Enclave you will be able to reinstall the bumper cover that you mentioned.

For the 3.3 liter engine of your 2009 Hyundai Santa Fe you would need the frost plug style heater part #KH11479 which installs in the very center of the back of the motor as you face it under the hood.

I checked with my source at Kat/5-Star and they confirmed that the Kat Heaters Custom Fit Cartridge Engine Block Heater #KH11812 is going to plug into the "FL"(front left) port on the engine block diagram I have attached to this question.…

The correct heater that is designed to fit your 2015 Hyundai Santa Fe with a 3.3L V6 is the Kat's Heaters Custom Engine Block Heater - Frost Plug Style #KH11479. For the frost plug location on your engine block, it is located on the right center…