Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.
Hey Lorenzo. Your 2024 Chevrolet Silverado 3500 has what's called Pulse Wave Modulation, which will not provide the wireless cameras with the correct power it needs to run when connected. This is a power saving feature in newer trucks. To fix…
I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…
...43VR which is rated for up to 500lbs and includes a stronger bumper tube and mounting brackets. This will allow you to add the Ultra-Fab Folding Spare Tire Carrier # UF15-954730 along with Cargo Tray...
Hi Thomas; I'm sorry to say that the 24" extension #e99052 is the only one available at this time. I see you went ahead and grabbed the #e99049 which is only 60" long so I'm assuming that 4" difference is enough to clear. That…
Hey Eric, I know you mentioned you were installing the Vision S+ camera, is the monitor as well a vision S+ monitor or is it the monitor for the old Vision S system? The 2 systems components are not compatible with each other so the camera and…
In order to determine the capacity of the rear bumper on any fifth wheel trailer you'll need to reach out to the trailer manufacturer as we don't have this information. That said, it's typically around the 200 lb mark. If you need/want…
Hey Christopher, at this time the Furrion Chill Cube doesn't have a thermostat that will work with a furnace although we have heard they are working on that. So in meantime the best option is a furnace only thermostat like the part #DMC84RR which…
The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…
Hey Dan! The usable space for the Mount-n-Lock #MNT97ZR is the same as the inside dimensions which are 24" long x 24" wide x 2-5/8" tall. The shipping weight is 25 lbs. What do you plan on using it for?
Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…
...the carrier is folded is it at 90 degrees to the top of the bumper or is is slightly angled away from vertical? Im wondering if it can be folded up even though there is that 1inch protrusion of the ladder...
Filters
