Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
RV and Camper Bike Racks by Stromberg Carlson
Count on Stromberg Carlson rv and camper bike racks for solid support on your trailer. Options mount on the A-frame or the ladder, hold bikes securely, and installation was straightforward; some installs used a 3/8 metal drill bit for final bolts. Measure for turning clearance around your propane cover and tow vehicle, and remember front-mounted setups can add tongue weight.
They can work well for smaller kids bikes and hold them securely. For e-bikes with a battery box in the frame triangle, check strap space—straps may not fit and alternate tie-downs or orientation may be needed. Latch-down loops can be tight, so take time hooking them. If mounting near a spare, add pads to reduce bikes bumping. Confirm ladder access and swing clearance before use.
Position it as far back on the A-frame as practical to clear the propane bottle cover and improve tow-vehicle turning space. If needed, add spacers to raise the mount slightly for extra clearance. Larger wheel bikes can reduce tailgate or bumper clearance, so test with your bikes and tow vehicle, including curb approaches. Lowering the front jack can make loading easier.
Installation is generally straightforward. Have a sharp 3/8 metal drill bit for the final bolts and the right tools on hand. Two people can make positioning easier. Check the supplied fasteners for length and quality; some swap to higher-grade hardware. After mounting, verify you can remove the propane tank without dismantling the rack if that access matters to you.
Yes, Stromberg Carlson offers trailer-mounted options that work on travel trailers. Use a rack that fits your trailer's mounting point and check that it clears the propane cover. Mock up your setup to confirm turning radius with your tow vehicle. Front-mount styles add tongue weight, so account for the bikes and rack. Avoid relying on a flimsy rear bumper mount.
Filters
