1. RV & Camper
2. RV Window Parts
3. Redx

Hey Matt, Both the Advent Air Low Profile RV Air Conditioner - 15,000 Btu - White #ADV29FR and Black #ADV56FR have a 500 cubic feet per minute (CFM) air flow rating.

Our closest options for the seals you have pictured are part #SR43FR and #SR63FR. You'll want to take a quick measurement of the seals you have to ensure that these will match up and properly seal your windows. I've attached pictures…

The Advent Air Low Profile RV Air Conditioner #ADV56FR included with the Advent Air Low Profile RV AC Package #ASA78YR does not list specific starting and running watts. I was able to find information in a flyer for this AC that it has a rated…

I do not have the abilty to pull OEM build sheets and part numbers however, the press In Window Edge Weatherstrip for Enclosed Trailer, #SR63FR is a good replacement option for most commonly used widow glazing by OEM. My suggestion is to pull the…

The most common window edge weather stripping, sometimes referred to as window glazing, for RV's is either #SR43FR at 1/2" x 1/4" or #SR63FR at 3/4" x 5/16". I suggest that you pull the end up on a section you currently have…

The Lock N Roll Articulating Coupler #336TS502 will come with two 5/8" grade 5 coarse thread mounting bolts and lock nuts. These bolts have a recommended torque spec of 112 lb-ft.

In order to find the correct replacement seal for the window in your camper we'll need to know the profile of the seal, the sizing, and how it currently attaches to the window. Most window seals will typically have a crescent moon shape and press…

The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…

In regards to the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, the float side is on the right part #LC26VR and the fixed is on the left part #LC84FR.

Hi Carrie, Since you have a Roadmaster Sterling All-Terrain Tow Bar #RM-576 you'll want to go with a Roadmaster baseplate to avoid having to purchase an additional adapter to connect to it. If you have a factory steel or plastic bumper then you…

Each of the leaves on the Leaf Spring #e47SR are 3/8" so this will give the spring pack a height of 1-1/2". Here is a list of our U-Bolt Kits for a 3" axle. Redline #APUBR-9 Dexter #APUBR-8 CE Smith #CE23003

From the images you attached, description provided, etc. the Press In Window Edge Weatherstrip for Enclosed Trailer, #SR43FR that we offer is a similar product to what you have only in black. This will work as a replacement item if black is…