Hey Edwin, The Skylight #SR89YR will work perfectly fine with your 1-1/4" thick roof on your 2018 Lance 1575, though they typically will require some trimming to the garnish to fit perfectly. You will want to pick up 2 tubes of self leveling…
Happy to help Bruce H, To install the Specialty Recreation Skylight we'd recommend using the Specialty Recreation Skylight Installation Kit #SR76RR. Years ago, most RV skylights were usually installed with butyl tape under the flange and self…
Hey Michael, You do not want to use self-leveling sealant with the Specialty Recreation Universal Replacement RV Skylight - 14" Wide x 22" Long - Smoke #SR67RR because it is made from polycarbonate, which doesn't mesh well with that…
Hey James! The tallest skylight we have is the Specialty Recreation Replacement RV Skylight w/ Inner Garnish item #SR66MR. It's designed to replace an existing skylight but it will work to add a new one as well. It fits a 14" x 22"…
Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit…
Hey Kevin. Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is just the replacement fabric. It'll attach to your existing awning roller so long as you have a 20' powered awning. There is no stitching built into the fabric for…
Hello Robin, thanks for reaching out. The Thomas Payne Heritage Three-Seat Reclining RV Couch #TP43KR weighs approximately 200 lbs altogether including all 3 sections. What kind of RV is it going in?
Hey Adina, from what I could find the Norcold N811F requires a cutout that is 60" high x 23-1/2" wide x 24" deep. I would double check your opening just to be sure but based on those dimensions I recommend the Norcold RV Refrigerator…
Hey Brad. You'll be wanting the Curt Adapter #C88KR. This will fit into the OEM pucks of your '25 Chevy 2500HD and will allow you to reuse your B&W Patriot Sliding Hitch. What camper are you towing with your truck?
Hey Dan, There unfortunately isn't a guide to tell us what size skylight dome your trailer has installed on it so you'll need to measure your current one to find the correct replacement. We offer the following sizes: 14"W x 14"L…
Unfortunately, it does not Terri. The Specialty Recreation Inner Garnish for RV Skylight item #SR57MR does not come with pre-drilled holes because it's a universal replacement part. The reason being is that RV ceiling and framing thicknesses…
Hey Mike, thanks for reaching out! The Alpha Systems AlphaThane 5121 Self-Leveling Sealant #AL35KV is designed for wood, metal, and glass materials. Since your skylights are polycarbonate I recommend using the Specialty Recreation Skylight Sealant…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Ready for a straightforward swap, these white RV skylights install cleanly when you take your time pulling old sealant and set them with butyl tape. Plan on more than one tube of self-leveling sealant, and reuse existing screws or match new ones after removal. Verify your cutout and roof thickness; for 1-1/4" roofs, trimming the inner garnish may be needed.
Yes. On curved roofs, pad low spots and avoid cranking screws too tight to help prevent stress and cracking. Inspect the skylight for corner warping before drilling; gaps at the corners can compromise the seal. Dry-fit first and confirm full sealant contact all around.
Some do not include hardware. Be ready to reuse your existing screws or pick up replacements. If the predrilled holes don't line up, you can drill new ones and fill unused holes when the butyl compresses. Add a couple extra screws if needed for a good fit, and avoid over-tightening.
Measure your roof cutout first and match the skylight to that opening. Common cutouts like 14" x 22" are available, but verify both cutout and overall flange size. Check your roof thickness; a 1-1/4" roof can work, though trimming the inner garnish may be needed. Dry-fit to confirm the screw holes align; you may need to adjust.
Use butyl tape under the flange and a self-leveling lap sealant on top. Two rows of 1/8 x 1" butyl tape have worked well, and expect to use multiple tubes of sealant—1 tube is often not enough, plan for 2 to 3. Lay a continuous bead and inspect for gaps to keep it watertight.
Inner Garnish Only
Skylight Only
RV Skylight Parts or Accessories
Filters
