RV Jack Pads - 6 Inch Jack Foot, Ultra-Fab Leveling System

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

Hey Dean, thanks for the pictures and the measurements. The measurements you gave me match up and those look like Lippert jacks. The SnapPad SnapJack SJ RV Scissor Jack Pads item #SN32FR are exactly what you need for your 2024 Grand Design Momentum…

Hey Scott, yes the Portable Power Watchdog Surge Protector #HU62VR that you referenced is the current version that will work with your Newmar.

Hello Kate F, I too am a Kate F =) Yes, the Valterra #SS01 Sewer Solution can definitely work off-grid, but there are a few things to keep in mind to make sure it works well in your setup. The great thing about this system is that it doesn’t need…

Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.

Gerald, the 12-ton Tallboy #PM94FR weighs about 37 lbs all-in, including the base plate, extensions, and carry bag. It’s a little heavy, but that’s the tradeoff for stability and steel construction - the 9-1/2 inch base plate and solid risers are…

Hey Mitchell, yes the Valterra StayPut Tandem Trailer Tire Changing Ramp #VAL68MB that you referenced will work with the Curt independent suspension you have and will still lift the trailer wheels up high enough to allow you to change it. How do you…

Hey Nelson, since your jack feet are 7-3/4 inch in diameter the correct size SnapPad would be the part #SP34FR which is the 8 inch size. The 1/4 inch difference wouldn't cause any issues and is close enough to allow for a solid fit still.

Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…

Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…

Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…

Hey Jeffrey! the overall height of the Roadmaster Dual Hitch Receiver Adapter #RM68BQ is 11-1/4". The distance from the hitch pin hole to the top receiver hitch pin hole is 8-1/4". I attached a picture the full dimensions below. What are…