Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Steve, yes the Dexter Nev-R-Adjust Brake Assembly set part #23-458-459 is the correct set for your Airstream based on the part numbers you mentioned. Also the hub/drum part #8-388-80UC3 that you referenced as well would be correct for your…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
Diamond RV Interior Lights for simple, bright upgrades
Diamond makes swaps straightforward, from 12 volt puck and reading lights to LED strips for old fluorescent fixtures. Wire straight to existing 12 volt power and ground, and use an LED-compatible dimmer if you want dimming. For a clean fit, match your cutout—choices include spring-mount pucks for a 3" hole or lights that fit a 4" cutout with a 4-1/2" lens.
Yes, when used with an LED compatible dimmer switch. Dimming quality depends on the dimmer; some switches adjust LEDs more smoothly than others. LEDs may not dim uniformly as the switch is pulled down, so test your switch with one light before outfitting a whole area.
Start by checking for heat and wiring issues. Flickering can point to heat buildup—add airflow to the backside of the housing. A sudden failure can indicate a faulty switch or a loose ground. If you notice a partial strobe effect, let the light warm up and recheck connections and mounting for tight, clean contact.
Diamond offers a puck that fits a 4" cutout with a 4-1/2" diameter lens. For spring-mount styles, a 3 inch hole is common; if your opening is 2-3/4 inch you may need to slightly open up the hole. If you already have a 3 inch hole, choose a puck sized to fit without enlarging.
Yes, most Diamond 12V fixtures wire to your existing 12 volt power and ground. For Diamond LED T8 light strips that replace fluorescent tubes, you just connect them up per the included diagram. Take a close look at the illustrations and verify wiring before you start, as some diagrams can be small.
Filters
