Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…
Hey Rob! You can actually use either one, but my recommendation would be the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches #BWGNRK1320-5W. B&W makes some of the best hitches available, and the Turnoverball is no…
Hey John! With four steps the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is likely the better choice over the short #MR54RV. I went ahead and attached the full dimensions of both below so you can see what you think will fit best on your…
Replacement Cam Lock Cylinder for RVs, #295-000077 is a 1-3/4" long by 3/4" diameter measured at the threads. The 1-3/4 inch length of the Replacement Cam Lock Cylinder #295-000077 refers to the threaded length of the cylinder. Other…
Hey Richard, the Bauer NE RV Entry Door Lock for Trailers #BA53UR that you referenced SHOULD fit your Entegra Condor as it was designed to fit the standard RV door cut outs that measure 3-3/4" tall x 2-3/4" wide which your RV should have…
The lock cylinder of the Deluxe Compartment Door Key Lock #37200185 is 1-3/8" in length, with an overall total length of 1-5/8". The cam latch only has a 1-3/4" overall length. I looked through our other options and wasn't able to…
The cylinders for the latches need to be measured for length to get you the correct replacements. This means removing the lock cylinder which should not be difficult if it is able to be removed as some are and some are not. If you disassemble the…
Hey Tyler, you’ve got a couple ways to approach that depending on how often you’re off-grid. If most of your time is still campgrounds, the AR3 Essential #GB39FR will cover your day-to-day really well. Then for occasional off-grid trips, some folks…
Hey Jordan! Yes, the Global Link Vise Lock #295-000024, Global Link RV Entry Door Locking Latch #295-000019, and Replacement Cam Lock Cylinder #295-000005 can all use the same key. Just make sure you choose the keyed alike option for each one before…
Hi Bruce, that’s a really good question and I can see why this has been frustrating, especially when you just want something solid and safe that works with your door the first time. The honest answer is that a 1-7/8 inch thick door is outside the…
Hey Ralph, for replacement slam latches I would recommend going with the Global Link RV Slam Latch part #295-000015 which will not come open when you are travelling and you can get them keyed alike so that you'd need only one lock for all of…
Hey Keith, The Furrion Tankless #FR93FR will fit into that cutout you have and be a good replacement. The water heater itself is 12-5/6 x 12-5/8 fitting nicely into your 13 x13 cutout. The depth of the heater itself is 19-1/4 which should fit nicely.…
Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…
Hey Rob! You can actually use either one, but my recommendation would be the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches #BWGNRK1320-5W. B&W makes some of the best hitches available, and the Turnoverball is no…
Hey John! With four steps the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is likely the better choice over the short #MR54RV. I went ahead and attached the full dimensions of both below so you can see what you think will fit best on your…
Replacement Cam Lock Cylinder for RVs, #295-000077 is a 1-3/4" long by 3/4" diameter measured at the threads. The 1-3/4 inch length of the Replacement Cam Lock Cylinder #295-000077 refers to the threaded length of the cylinder. Other…
Hey Richard, the Bauer NE RV Entry Door Lock for Trailers #BA53UR that you referenced SHOULD fit your Entegra Condor as it was designed to fit the standard RV door cut outs that measure 3-3/4" tall x 2-3/4" wide which your RV should have…
The lock cylinder of the Deluxe Compartment Door Key Lock #37200185 is 1-3/8" in length, with an overall total length of 1-5/8". The cam latch only has a 1-3/4" overall length. I looked through our other options and wasn't able to…
The cylinders for the latches need to be measured for length to get you the correct replacements. This means removing the lock cylinder which should not be difficult if it is able to be removed as some are and some are not. If you disassemble the…
Hey Tyler, you’ve got a couple ways to approach that depending on how often you’re off-grid. If most of your time is still campgrounds, the AR3 Essential #GB39FR will cover your day-to-day really well. Then for occasional off-grid trips, some folks…
Hey Jordan! Yes, the Global Link Vise Lock #295-000024, Global Link RV Entry Door Locking Latch #295-000019, and Replacement Cam Lock Cylinder #295-000005 can all use the same key. Just make sure you choose the keyed alike option for each one before…
Hi Bruce, that’s a really good question and I can see why this has been frustrating, especially when you just want something solid and safe that works with your door the first time. The honest answer is that a 1-7/8 inch thick door is outside the…
Hey Ralph, for replacement slam latches I would recommend going with the Global Link RV Slam Latch part #295-000015 which will not come open when you are travelling and you can get them keyed alike so that you'd need only one lock for all of…
Hey Keith, The Furrion Tankless #FR93FR will fit into that cutout you have and be a good replacement. The water heater itself is 12-5/6 x 12-5/8 fitting nicely into your 13 x13 cutout. The depth of the heater itself is 19-1/4 which should fit nicely.…
Filters
