Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.
Hey Lorenzo. Your 2024 Chevrolet Silverado 3500 has what's called Pulse Wave Modulation, which will not provide the wireless cameras with the correct power it needs to run when connected. This is a power saving feature in newer trucks. To fix…
I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…
As Lance did not position the spare tire on the rear bumper I would say it is not strong enough to support any additional weight. We do have the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which is rated for up to 500lbs and includes…
...is there any chance you can get a 12 extension for the 24x40 etrailer Cargo Carrier for RV Bumper? the 24 would make the cargo carrier interfere with my camper tail lights and not allow it to close...
Hey Eric, I know you mentioned you were installing the Vision S+ camera, is the monitor as well a vision S+ monitor or is it the monitor for the old Vision S system? The 2 systems components are not compatible with each other so the camera and…
...the capacity to 400 lbs. In order to carry cargo and gear on the bumper, I highly recommend the etrailer Cargo Carrier for RV Bumper offered in 24x40 part # e99050, 24x60 part # e99049, 24x64 part # e83YR...
...Hello
I just recently bought a Furrion chill cube He from etrailer with Furrion single zone controller and wall thermostat for my 2020 Rockwood mini lite 2104s.
I have it installed but the wiring...
...The 24x84 etrailer Cargo Carrier for RV Bumper part # e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm...
Hey Dan! The usable space for the Mount-n-Lock #MNT97ZR is the same as the inside dimensions which are 24" long x 24" wide x 2-5/8" tall. The shipping weight is 25 lbs. What do you plan on using it for?
Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…
...Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, # e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove...
Filters
