Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
Saris RV and Camper Bike Racks for secure rides
Built sturdy and simple to use, Saris RV and camper bike racks keep bikes steady with wheel-mount designs that avoid frame contact. Some fit both 1-1/4" and 2" hitches and feel stable with little wobble, though the rack weight can be noticeable when lifting. If you have full fenders, consider a frame-mount style instead, and double-check Class I hitch compatibility since Saris can be hit and miss there.
Yes, Saris offers heavy-duty options sturdy enough for e-bikes. Check the rack's per-bike weight rating against your e-bike's weight. Racks and multi-bike setups can be heavy, so having a second person to lift into the hitch helps. Extra weight on the rear can affect ride quality; consider your suspension and load balance.
Assembly is straightforward, but inspect every fastener before use. Make sure the locking cable housing is secured and all hardware is installed and tightened. Verify the rear wheel strap assembly works smoothly. Do a short test drive and recheck bolts. If carrying bikes with fenders, confirm the tire clamp/strap won't deform the fenders; add a wheel block or strap if needed.
Choose a Saris wheel-mount design that clamps the tires, not the frame, to avoid scratches. Loading and unloading is quick and simple. If you run full fenders, check that the wheel arms and straps won't press into the fender; a wheel block or extra front-tire strap can help. Always verify your bike's wheelbase and tire size fit the trays.
Some Saris racks fit 1-1/4" and 2" hitches. Confirm your receiver size and hitch class, since compatibility with Class I can vary. Measure from the hitch pin hole to the outer bumper to ensure clearance. If you notice play in the receiver, use the rack's tightening method or add an anti-rattle or a supplemental strap to help reduce movement.
Filters
