What Size Hole to Cut When Installing SmartPlug Power Inlet

Question

Question:

What diameter hole do you recommend for a new install in the wall of my RV?

asked by: Bob

0

Expert Reply:

Hey Bob, when installing the SmartPlug RV/Marine Data Port Inlet # SM36MJ you would want to use a 3 inch diameter hole saw. Do

expert reply by: Jameson C

0

Bob

12/15/2025

Thanks Jameson! That seems big but that's what I'll use!

Jameson C.

12/15/2025

@Bob Do you have the plug already and do you happen to have hole saws?

Bob

12/16/2025

I received the plug yesterday but need to purchase a hole saw for the install.@JamesonC

Jameson C.

12/16/2025

@Bob right on! Yeah 3 inch is the correct size for data ports like this.

See All (4) Replies to Bob ∨

Joe

12/17/2025

I replaced the existing coax cover on my 2023 Airstream with the Smartplug. I use it for my Starlink, which uses the RJ45 plug. I didn't need to cut a hole in the camper, because the old cover was the same size. The screw pattern was the same too. It works great, it's water proof and matches the other Smartplug that has the power coupler. My camper is in storage, so I can't get a picture. It was a bit pricey, but I will never need to replace it, it's extremely durable. Thats worth the money to me.

Answer 1

We have the Multi-Purpose Access Door for RVs, #37231025. This is a 6-3/4" diameter hatch that requires a 5-1/2" diameter cutout. This threaded design easily twists off to provide instant access to plumbing, electrical, hose, fuel, and…

view full answer...

Answer 2

Yes, since the SmartPlug RV TV/Internet Inlet has an ethernet port, your Starlink will work just fine! If you're interested, I've also attached a product overview video for you to check out as well.

view full answer...

Answer 3

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

view full answer...

Answer 4

Hey Clint, I attached a diagram that has all of the dimensions of the front of the Smartplug part #SM36MJ but the dimension you asked for is 1-3/4 inches.

view full answer...

Answer 5

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

view full answer...

Answer 6

Hey Larry, the Smartplug part #SM96MJ is the correct part you are looking for as this has ability to have an ethernet connection for your Starlink and a coax for the cable connection. For the ethernet connector you would need the part #SM38MJ and…

view full answer...

Answer 7

It sure is Bob! The Keystone Single Jack USB-C Connector for SmartPlug Data Port Inlet item #SM86MJ is designed for a 100W/20V/5A USB-C PD power source. It'll be great for a Starlink Mini setup. The USB-C Connector item #SM86MJ is designed to be…

view full answer...

Answer 8

Hi Mike; the SmartPlug RV and Marine Power Inlet and Connector #SM67FR uses a 316 cast stainless steel housing, which offers maximum corrosion resistance. That’s the main reason it’s listed as a marine product. It can be used on an RV as well, but…

view full answer...

Answer 9

Hey Bob, thanks for reaching out! I have a great way to give you worry-free access to your Starlink internet, but you might need to find an ethernet adapter for your Starlink wiring. I'm not entirely familiar with all of their connections, but…

view full answer...

What Size Hole to Cut When Installing SmartPlug Power Inlet

Product Page this Question was Asked From

Continue Researching