Hand Tools - 3/4 Inch

Hey Steve! You're already on the right track with the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems #EQ95-01-5950. This is exactly what you need to install a WDH on your boat trailer. Go ahead and measure 27" - 32"…

Between the two kits you mentioned the Equal-i-zer part #EQ37120ET is the best choice. This is the highest quality option out there for a weight distribution system and is what Curt tried to emulate with their TruTrack part #C17501. The Curt kit is…

Hello Pete; thank you for providing that information. The most important thing when choosing a weight distribution hitch is tongue weight. We know the dry hitch weight of your trailer is 485 lbs and the GVWR is 4,485. Since tongue weight is typically…

...Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part # C40034 that you referenced. The general rule is for a 3/4...

Hey Nick, yes I would say that the Curt TruTrack 2P Weight Distribution System #C67ZV is rated too high for your Jayco Jayfeather. This has a tongue weight range of 800-1,000 lbs and you'd most likely have a tongue weight around 640 to 750 lb.…

While it is not a requirement, I do highly recommend using the Firestone Air Command I - Analog Gauge with Standard-Duty Compressor #F2158 with the Firestone Coil-Rite Air Helper Springs #F4176. The reason for that is the compressor is going to make…

Hey Zakery, Since the Denali package has Adaptive Ride Control the only option for your 2021 GMC Sierra 1500 Denali would be the Firestone Ride-Rite Air Helper Springs #F2609. These springs install on the frame in the same location as most fifth…

One difference between trunnion and round bar setups is how they attach to the head of the weight distribution system.The round style bars have grooves on the bar and just twist in. The trunnion style bars slide into the head from the side or back…

The Equal-i-zer Weight Distribution System #EQ37120ET that you referenced does come with a 2-5/16 inch hitch ball.

While no system is guaranteed to completely eliminate all sway a properly ratged Equal-i-zer weight distribution system is the best soluiton. Equal-i-zer systems use 4-point sway control, and are one of the most well recognized brands in the…

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

Hello Matt, Thanks so much for the picture. We most definitely have a 2" ball that you can swap it out with. From what I see the Husky Weight Distribution uses a 1 1/4" shank (I included an image so you can compare it to the ball you have…