Ratchet with 3/4" Socket for Anti-Rattle Hitch Bolts

See what our Experts say about this Mechanics Products Hand Tools

• Distance from Center of Hitch Pin Hole to Bar of Thule Hitching Post Pro
  The Thule Helium Aero 3-Bike Rack TH9043 makes an awful nice gift but you are correct that there is a short distance from the center of the hitch pin hole to the locking knob - just 4-1/2". The Thule Hitching Post Pro # TH934XTR you asked about does not have that knob and is 13-1/2" from the center of the hitch pin hole to the back of the upright on the rack. The trade off is that it does tighten into the hitch much differently. Instead of turning a knob it has an anti-rattle bolt, which...
  view full answer...
• Replacement Threaded Screw and Pin for Thule Hitching Post Pro # TH934XTR
  If you are needing the Flat Cap Screw that holds the adapter on the shank of the Thule Hitching Post Pro # TH934XTR, then you are needing part # 853-5787-02. If what you are needing is the replacement threaded pin for the Hitching Post Pro then you will need part # 853-5917. You can use the Ratchet with 3/4 inch Socket # PT20104-38524 to tighten the anti-rattle bolt down. This is a convenient thing to just keep in your rear cargo area so you don't have to go hunt down a wrench or socket. An...
  view full answer...
• Easiest Tool Recommendation for Installing Hitch Pin of Thule Hitching Post Pro
  The Thule Hitching Post Pro Bike Rack part # TH934XTR that you referenced does use a hitch pin bolt that will require either using the included wrench to install or possibly a socket and ratchet. The socket and ratchet would probably be the easiest route to go. We have a socket and ratchet together as part # PT20104-38524 if you wanted to go that route.
  view full answer...
• Replacement Key Recommendation for Thule Bike Rack with Lock Core N012
  Yes, the key you need is the part # THKEYN012. This matches the lock core you have on your bike rack and will work well.
  view full answer...
• What Size Wrench/Socket is Needed to Tighten Thule Hitch Pin Bolt
  The size wrench or socket for the hitch pin bolt part # 853-5917 is 3/4 inch. Which we have the socket and ratchet for that size part # PT20104-38524.
  view full answer...
• Recommendation for a 4-Bike Rack for a 2007 Hyundai Tucson
  For all of your alternative framed bikes, I recommend going with a platform style rack like the Saris Freedom # SA4414B. This will be a great rack for you and all your passengers! If your Electra's have fat bike tires you can change out the wheel cradles for fat bike wheel cradles # SA4419. The neat thing about the Freedom is the way the cradles pivot and slide up and down the central masts. This allows the rack to grab your bike's tube at the perfect angle. To secure your bikes to your...
  view full answer...
• Recommended Trailer Hitch to use Thule Bike Rack on 2017 Toyota Camry
  The hitches available for your 2017 Toyota Camry, the Curt # C12107 and Draw-Tite # 36540 are extremely similar and it would be difficult to say that one would be "better" than the other for your Thule Roadway # TH912XTR. The most noticeable difference is that the Curt hitch will require you to use stabilizing straps # 18050 when using your bike rack in order to maintain the warranty. The Draw-Tite # 36540 does not have the same requirement so I recommend going with that option over the...
  view full answer...
  
• What Size Wrench or Socket for Bolt Head of 8' Cable Lock and Anti-Rattle Hitch Lock # SA984
  I spoke with my contact at Saris and she told me that the size socket/wrench needed for the bolt on the # SA984 that you referenced would be a 19 mm or a 3/4 inch. So the wrench part # PT20104-38524 that you referenced would work with it.
  view full answer...

Do you have a question about this Hand Tool?