Folding Trailer Tongue

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate plate cut to the appropriate size to shim…

For your aluminum trailer with a galvanized steel tongue (swing-away tongues cannot be used on aluminum tongues), you'll need a die-cast steel tongue with a zinc finish from Fulton. The correct fit is going to depend on the size of your trailer…

For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR. Any swing-away actuators like your ACT-7.5K have been discontinued so this is the best solution. This has a 7,500 lb trailer capacity, is designed…

Bruce, we sure do. What you're looking for is the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue #FHDPB340301 which will work with 3" x 4" trailer tongues, has a 7,500 lb capacity, and has a bolt-on install.

I more or less agree with you. The Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, is a cleaner look and if you got a bad weld job you would not have a safe setup. I have done some welding, I am in no way a…

At this time we do not carry a compatible inner member for your Reliable ACT 7.5 KS actuator so I recommend replacing it with the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR. This hydraulic actuator activates trailer's brakes…

Hello Philip. I do have to recommend that you attach your safety chains behind the hinge as it says in the instructions. The hinge is technically a breaking point, so we want the chains attached behind this braking point. I know this will mean a…

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

I contacted the manufacturer of the Fulton Fold-Away Coupler, #FHDPW330300, and they told me that it does not matter which way you install the coupler to your trailer. You can decide which way you want you trailer coupler to swing that will work the…

Hey Bryan, I can definitely understand your concern, though your trailer frame won't be damaged or otherwise put under undue stress by adding the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue #FHDPB230101. That's…

The Trailer Hub Assembly for 3,500 lb Axles, #84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt…