Filter by Type of Actuator
$528.40 - $664.52
Videos
for Brake Actuator
Help Articles
for Brake Actuator
Expert Answers
for Brake Actuator
The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…
view full answer...You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…
view full answer...Hey Dwyane yes that is necessary unfortunately. We do have disc brake kits like the DeeMaxx Disc Brake Kit #DE68YR which will work with 7,000 lb axles that uses specific bearings. The last couple of things you'd need is a brake line kit…
view full answer...I do have an option for you but the coupler on your trailer is very old and we simply don't carry parts for them anymore as they were discontinued by the manufacturer. Therefore, the only option we can offer is a new coupler, the Demco Hydraulic…
view full answer...Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for…
view full answer...The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…
view full answer...For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…
view full answer...Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…
view full answer...Hello Richard, Congrats on the new 2024 Dutchman 36 5th wheel! What is your favorite new feature? Looking to make the swap over to disc brakes, you will not be disappointed. Here is the set-up you will want with the DeeMaxx brakes: - (2) sets of the…
view full answer...The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…
view full answer...First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…
view full answer...Filters
3 results
Whether you're upgrading your braking system or replacing a worn-out actuator, the right choice ensures smooth, controlled stops. From hydraulic to electric-over-hydraulic options, we’ll help you find the best fit for your trailer and towing setup.