2013 Toyota Tundra Truck Bed Camera

Hey Bill! Pressure won't be a problem with the ClearVU Backup Camera Cleaner System #CV64FR. This will easily be able to clean your rear camera. Also, it comes with 25' of tubing so routing it the way you described won't be an issue as…

Hey Joe! We haven't done a lot of installations on the #3460001 and I believe we tied it into a factory switch on the one we did. I would say find any open spot in the dash nearby for installation like the picture below.

Hey Kent, The Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights #RM-676 is a great tow bar to start off your component list with. It's going to include safety cables, a 7-wire to 6-wire adapter cable, and s 6-pole socket. You'll need the…

Hey Thom! You're not missing anything. The RVS WIreless Hitch Camera part #RVS87FR really is as simple as you made it out to be. It is new to us and we haven't had the chance to get one in yet but once we do we will make the videos and take…

Hey Matt! Thanks for the picture and welcome back! I am sorry but I do not have any videos of the EcoHitch Hidden Front Hitch item #EH25HR being installed let alone a detailed one like you're requesting. That looks like chrome plated plastic.

Hey Bill, the Flair-It High Pressure Hose #FL24FR that you referenced can be used with hot and cold water.

It can be difficult to give a truly accurate estimate for the length of time it takes to install the Custom Third Brake Light Camera for 8" Factory Monitor #3460001 on your 2020 Ford F-350 Super Duty. The time really depends on how comfortable…

Hey Raymond, the Flait-It High Pressure Hose #FL24FR is made of Nylon 11 which is extremely easy to bend, but it does have an 800 PSI rating so it will work great with a pressure washer. Most pressure washer hoses are going to be made from either…

Hey Joanne, I think I've found what you're looking for with the Surehoof Ribbed Rubber Trailer Mat #4872SM. This measures 48" x 72" which I would think is enough to cover your ramp and help your horse feel a little more comfortable…

Hi Paul; the kick sensor will still work after installing the etrailer Hitch #e56RR. It probably won't be the same motion has before so you will have to find the sweet spot with your foot to get it to work. This hitch fits the 2021 - 2024 Toyota…

Hey Cheryl, Yes, the Self-Contained Hydraulic Jack #e33VV could be bolted the frame of your horse trailer to upgrade you to a motorized jack. This jack has a 12,000lb capacity so you'll want to verify what your pin weight is to ensure it falls…

The Custom Third Brake Light Camera for 8" Factory Monitor part #3460001 could pretty easily be wired to an existing switch you have in the cab but I would not be able to offer much advice on this as it's designed to be used with the…