Backup Camera Specs:
Features:
See what you've been missing with this secondary backup camera that works while your tailgate is down. Easily connects in line with your factory backup camera whether mounted on top of your tailgate or your license plate - no programming needed.
Installation Notes:
Factory tailgate camera is required for installation as this product plugs into factory camera wiring harness.
More Information >Backup Camera Specs:
Features:
Ever put your truck in reverse only to realize that your backup camera is too dirty to see behind you? We love how this cleaning system conveniently lets you rinse off even the most stubborn road salt with your existing factory wiper button.
More Information >Videos
for Backup Camera
Help Articles
for Backup Camera
Expert Answers
for Backup Camera
Hey Ron, the Brandmotion Tailgate Delete Backup Camera with Wiring Harness #BM82FR that you referenced is a confirmed fit for your 2020 Ford F-350 and is a plug and play install like you are wanting. This will also display on your current…
view full answer...Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…
view full answer...The Rear View Safety Color Monitor #RVS-6139Q will be able to support up to 4 cameras including the Rear View Safety Forward Facing Camera #RVS-776-FF-5P you mention, and comes with a mounting plate. To wire the monitor and the cameras, use the…
view full answer...Hi Rob, The Taskmaster Trailer Wheel Lug Nut part #TA66QR requires a 3/4" socket for installation. However, we do have the CE Smith Trailer Wheel Acorn Lug Nut part #CE16720 that is 1/2"-20 with a chrome plate finish and works with a…
view full answer...Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.
view full answer...Hi Rick, I'm so sorry that happened with your ATV, it sounds really scary! To secure it to your tilt trailer and keep that from happening again, the etrailer E Track Wheel Tie Down Straps w/Roller Idlers part #e64PR you were looking at will do…
view full answer...Hey Ken, welcome back! So this is a really great question but at the end of the day the Curt A25 part #C16046 and the B and W Companion part #BWRVK3600 that both fit the OEM pucks of your 2026 Ram 3500 are really nice hitches that you can't go…
view full answer...Hey Joseph, thanks for reaching out. The difference between the yellow and black SumoSprings is the weight capacity or stiffness of the spring. For the 2018 Ram ProMaster 1500, the black ones part #SSR-307-47 are 1,500 lb capacity. Those are good for…
view full answer...Hey Jeff, Depending on how much clearance you need from that tailgate is going to determine what kind of hitch extender you will need. Assuming you just have a factory 2" hitch receiver on your Ram you could go with the hitch extender #e48YR…
view full answer...Hey James, we can only get the Voyager Camera System part #ASA52FR as a kit that includes the rear camera that you said you didn't need so this would be only way we could help you. I would still go with this kit and either leave the rear camera…
view full answer...Hey Mark! The B&W Continuum #BW78FR is great for any setup as long as you're in the 600–1,600 lb tongue weight range of the system. The best part about it is you can set it perfectly for any tongue weight so it won't be over or…
view full answer...Hey Eric, I can't find anything under 34-140, but maybe you meant 31-140 which is the silver Safe-T-Plus Steering Stabilizer #ST39VR. This is for Class B, C Motorhomes, Leisure Travel & Custom Vans, Pickup Truck, SUV, and Van Tow Vehicles,…
view full answer...