2015 Ram 2500 Bumpers

Hello Allen, Sorry for the delay. I wanted to make sure I had the correct mounting brackets added on our site before getting back to you. I did reach out to Westin to confirm, with older trucks it’s always a good idea to double check. Instead of the…

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

Hi Daniel; is this for a 1972 F-250? Assuming you have the standard bed model, the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit #20002-92230 comes with the brackets you need. It is the bumper #20002 and the installation kit #92230…

Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…

Hi Erin! The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is indeed the same model as the 9998948. We changed the part number on our website a little as it was similar to another part number we carry. What are you wanting to install…

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

I have the bumper you need! Unfortunately, I confirmed with Westin that the Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel #73000 does not fit your 1984 Chevy K10. However, we have the exact same model in chrome plated steel that does fit.…

Hey Nina. The ARB Custom Fit Bondi Deluxe Front Bumper item #ARB66DM is not rated to be used for flat towing. I checked our other options that fit your 2023 Jeep Wrangler and we do not have one that is rated for flat towing. To flat tow your 2023…

Hey Giff, I ran out to our warehouse and grabbed a set of the #VAL98MB to measure for you. I will attach a photo as well to better lay it out. The shorter section, or chock, is 7" long. The longer section, or ramp, is going to come in at…

I have several solutions for you but the bumper part #66000 is not a confirmed fit for your 1997 Ford F-350. Included is a link to all the confirmed fit options in colors black #20000-92230, silver #20002-92230, and chrome #21000-92230. The correct…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Rick, I always recommend the Tekonsha trailer wiring harnesses like the part #118786 over Curt harnesses as they tend to just be more reliable so that would be what I would recommend. Do you have a hitch already? This harness will not interfere…