Westin Bumpers for 1996 Nissan Pickup that Work with License Plate Light Kit 00007153

Question

Question:

Will license plate kit fit a 96 Nissan Pickup XE

asked by: Michael A

0

Expert Reply:

The Westin Replacement License Plate Light Kit for Westin Bumpers # 00007153 is made to work with specific Westin aftermarket bumper products, those in their Diamondstep, Surestep or Perfect Match series. It works with all Diamondstep and Surestep bumpers and the Perfect Match bumpers 31000, 31001 and 32000.

The linked page shows all four currently-available Westin bumpers that fit your 1996 Nissan pickup, parts # 66001-95300, # 66000-95300, # 76000-95300, and # 76001-95300.

All of these are compatible with this light kit.

expert reply by: Adam R

0

Answer 1

The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit #20000-92230 will include a set of license plate lights. The lights included are the same as our Replacement Kit #00007153 but come in black instead of chrome like our replacements.…

view full answer...

Answer 2

For Westin Surestep bumper #61001 you can use license plate light kit #00007153. This kit fits ALL Surestep bumpers.

view full answer...

Answer 3

You can get a replacement light kit #00007153 which will come with two new lights, bulbs and hardware. These lights are chrome in color and they are only sold as a pair. We have confirmed with the folks at Westin that these will work with the 61000…

view full answer...

Answer 4

The Westin SureStep Replacement Bumper part #61001-95700 that you referenced would use a standard license plate frame like the part #CR15350. I attached a picture that shows where you'll attach the bracket to.

view full answer...

Answer 5

To add a light kit to the Westin Fey Surestep Rear Bumper #61001-93500 on your 1989 Toyota Pickup you need the Replacement License Plate Light Kit for Westin Bumpers #00007153, which works with all Surestep bumpers as well as a few specific models.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Westin Bumpers for 1996 Nissan Pickup that Work with License Plate Light Kit 00007153

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching