2016 Chevrolet Suburban BOLT brand vehicle and hitch locks

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Good morning John! So we actually don't have replacement leaf springs for vehicles, so if your 2015 F150xl needs new suspension, you'll want to do that before going the route of upgrading with suspension enhancement items that we are able to…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

Hello Craig, The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs #CC-275 that you were looking at would definitely work for what you are trying to accomplish. Another option would be the Gen-Y…

Hello David, thanks for reaching out. I will need more information on your camper shell in order to know what locks will work. Can you provide the model number from your shell? That will help a lot to narrow things down. For example, if your ARE…

It might be Dan but I wasn't able to pull any specific information off of the UFP 13674 part number you gave me. What you'll need to do is pull one of the hubs and read the part numbers stamped into the sides of the bearings. This information…

Hello Crystal, thanks for reaching out. The Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers #Y74ZR will stick out 35-1/2". This is measured from the center of the hitch pin hole to the rearmost part of the rack. Can't say…

I went out to the warehouse and took some measurements of the Replacement Lock Cylinder #BL692916 for you. The max diameter of the cylinder is about 0.98" and then the max length (up to the bezel) is about 1.70" as you can see in the…

Hey Patrick, Absolutely! The Weigh Safe Flap Jacks can be used in the compact position as well as extended. So whether you need the clearance or just need something for it to sit on this is going to work great for you. Do you see yourself needing to…

The correct Replacement Lock Cylinder for BOLT Toolbox Latch for a 2017 Ford F-150 is part #BL7025636.

A 2016 Chevy Colorado should have a center cut transponder key so you would need the Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Center Cut GM Key #BL7023480. This is just the replacement lock cylinder so if you're needing parts…

Hey Chris! The only solution I have to offer you is to use the Yakima StraightShot Hitch Extension item #Y69VR. It will cut your hitches capacity in half but will extend the Yakima EXO Swing Away like item #Y54ZR out an additional 7-1/2". This…